Digital guide
You are here:
Kollmorgen CR10550U1343D
Product Introduction:
CR10550U1343D belongs to Kollmorgen’s 1G Performance cable family. It carries encoder/resolver feedback signals from an AKM servo motor to an AKD-series drive. The “CR” prefix identifies cable assemblies; “10550” denotes cable construction; “U1343D” is the length and connector variant code.
Detailed content
Technical Specifications:
-
Cable class: 1G Performance, dynamic bend rating
-
Compatibility: AKM motors with resolver or SFD/encoder feedback to AKD drives
-
Conductor: twisted-pair signal wires with overall foil + braid shield
-
Jacket: PVC or PUR (variant dependent), oil-resistant
-
Bend radius: suitable for drag-chain / robotic motion (dynamic flex)
-
Length: defined by suffix U1343D (custom length code)
-
Temperature: −20°C to +80°C (flexing), up to +90°C static
-
Connectors: motor-side Intercontec or circular metric; drive-side D-sub or terminal
Functional Features:
-
High-noise-immunity shielded construction
-
Supports resolver, incremental, sine/cosine, SFD
-
Designed for continuous flexing in gantry and robot arms
-
Color-coded cores for fast termination
Application Scenarios:
Dynamic axes, 3D gantries, pick-and-place, rotary indexing tables, multi-axis robots.
Installation Requirements:
-
Minimum bend radius marked on jacket must be respected
-
Shield drained to drive chassis only at one end (or per AKD manual)
-
Separate from power cable in different tray or ≥10 cm spacing if parallel
Usage Notes:
-
Not for 2G AKM2G/AKD2G single-cable SFD3 hybrid use
-
Inspect jacket for abrasion after 10⁶ cycles in severe duty
