Digital guide

You are here:
  1. Home
  2. Kollmorgen
  3. Kollmorgen CR06902

Kollmorgen CR06902

  • Product Name:​ AKM-Series Feedback / Motor Interconnect Cable Assembly
  • Product Introduction:​ Pre-molded Kollmorgen cable assembly from CR accessory family, used to link AKM servo motor feedback or auxiliary signals to AKD/Servostar drive feedback port.
WhatApp
WeChat

Detailed content

  • Technical Specifications:
    • Type: shielded multi-conductor servo cable, molded ends
    • Typical Use: motor feedback link (resolver/SFD/EnDat depending on motor)
    • Jacket: PVC or PUR, oil-resistant variant per length code
    • Temperature Range: 80 °C to 105 °C rated
    • Connectors: Kollmorgen SpeedTec M23 or Intercontec compatible, keyed
    • Length: defined by suffix in full Kollmorgen order code
  • Functional Features:​ Twisted-pair signal lines with drain wire; strain-relief boot; noise-immune shielding; keyed connector prevents mis-mating.
  • Material / Structure:​ Bare copper conductors, mylar/aluminum foil shield, tinned copper braid, molded thermoplastic elastomer backshell.
  • Working Principle:​ Carries feedback transducer signals and optional 5 V/24 V supply between motor and drive without intermediate break.
  • Application Scenarios:​ Wiring AKM motors to AKD, S300, S600 or Servostar CD drives; retrofit harness replacement.
  • Installation Requirements:​ Route separately from motor power cables or use Kollmorgen-approved hybrid cable tray separation; bond shield to drive chassis only at one end per manual; do not splice.
  • Usage Notes:​ Confirm exact pinout against motor feedback type before fitting; verify connector key position (rotatable vs fixed); PUR version required for continuous flex or drag-chain duty.

You may also like