Digital guide
You are here:
Kollmorgen CR03251-000000
-
Product Name: Motor Power/Feedback Interconnect Cable Assembly (AKM to AKD, standard length)
-
Product Introduction: Kollmorgen-specified pre-terminated cable set used to connect AKM servo motors to AKD drives. Carries motor power phases plus feedback pair in one shielded jacket for resolver or encoder types depending on crimp/connector variant.
Detailed content
-
Technical Specifications:
-
Type: shielded multi-conductor servo cable
-
Typical build: 4×1 mm² power + twisted-pair feedback (e.g., 4×2×0.25 mm² for resolver)
-
Connectors: Intercontec motor side, AKD drive terminal side
-
Rating: 240/480 VAC class, oil-resistant PVC or PUR jacket
-
Length code: 000000 denotes default/standard length or bulk variant in ordering system
-
-
Functional Features: Reduces wiring errors; supports single-cable or split-cable topology; EMC-optimized braid; color-coded cores; strain-relief boot.
-
Application Scenarios: Factory wiring of AKM+AKD axes in OEM machines.
-
Construction & Materials: Tinned copper conductors, polyester tape separation, copper braid shield, molded connector backshell.
-
Installation Requirements: Maintain minimum bend radius; separate from high-power mains runs; ground shield at drive end; torque connector coupling ring to spec.
-
Usage Notes: Do not extend by splicing; verify feedback pinout matches motor feedback type; inspect shield continuity before energizing.
