Technical Specifications:

• Part Number: CP306260
• Cable Type: 3-phase + PE (4-core) power cable
• Conductor Size: 6 mm² (approximately — verify exact gauge from datasheet)
• Voltage Rating: 600/1000V
• Current Rating: 32A (typical for 6 mm² copper)
• Cable Length: Factory-specified length (commonly 3m or 5m — verify exact length from part number decoding)
• Connector (Drive End): Kollmorgen proprietary power connector or IEC 60309 (depending on region)
• Connector (Mains End): IEC 60309 blue (230V) or red (400V) industrial plug
• Shielding: Overall braided copper shield (drain wire included)
• Insulation: XLPE or silicone rubber (high-temperature rated)
• Outer Jacket: PUR (polyurethane) — oil and abrasion resistant
• Bend Radius: Minimum 5× cable diameter
• Temperature Range: -20°C to +80°C (continuous), +120°C (short term)
• Protection Rating: IP67 (with connectors mated)

Material Composition:

• Conductors: Oxygen-free high-conductivity (OFHC) copper, Class 5 (flexible)
• Insulation: Cross-linked polyethylene (XLPE) — Class B (130°C)
• Shield: Tinned copper braid (coverage >85%)
• Jacket: Polyurethane (PUR) — abrasion, oil, UV resistant
• Connectors: Nickel-plated brass housing, silver-plated copper contacts

Structural Features:

• Pre-terminated at both ends — no field termination required
• Drain wire with ring terminal for chassis ground
• Flexible construction — suitable for moving cable carriers (if rated for dynamic use)
• Color coding per IEC 60446: Brown (L1), Black (L2), Grey (L3), Green/Yellow (PE)

Working Principle:
The cable delivers 3-phase AC power from the mains supply to the servo drive’s rectifier input stage. The built-in EMI shield prevents high-frequency switching noise from the drive’s IGBT inverter from radiating back onto the mains supply, ensuring EMC compliance (EN 61800-3). The drain wire provides a low-impedance ground path for shield current.

Key Advantages:

• Factory-terminated — eliminates field wiring errors
• EMC-optimized — meets EN 61800-3 Category C3 (or higher)
• High flexibility — PUR jacket resists oil, abrasion, and repeated flexing
• Reliable connections — industrial-grade connectors with IP67 rating
• Kollmorgen-validated — tested with AKD drives for optimal performance

Applicable Industries:

• All AKD drive installations
• CNC machines
• Robotics
• Packaging equipment
• Any Kollmorgen servo system

Installation Requirements:

• Route cable away from signal/encoder cables (min 100 mm separation)
• Use cable clamp at drive end and mains end
• Connect drain wire to cabinet ground bar (both ends if long run)
• Do not exceed minimum bend radius
• Do not run cable parallel to high-current welding cables

Usage Notes:

• Replace entire assembly if damaged — do not re-terminate in the field
• Verify connector keying matches drive and mains supply
• For dynamic applications, confirm cable is rated for cable carrier use (CP series with “DYN” suffix)
• Store coiled (not kinked) in dry environment