Digital guide
You are here:
Kollmorgen CH063C-13-3105
Product Introduction:
The CH063C-13-3105 is a pre-configured encoder cable harness manufactured by Kollmorgen for connecting AKM and BDS series servo motors to AKD servo drives, featuring shielded twisted-pair construction with M23 connectors.
Model Series: CH Series Cable Harness
Detailed content
Technical Specifications:
| Parameter | Value |
|---|---|
| Cable Type | Shielded twisted pair, 6-conductor |
| Connector (Motor End) | M23, 12-pin, straight, IP67 |
| Connector (Drive End) | M23, 12-pin, straight, IP67 |
| Cable Length | 3 m (standard; custom lengths available) |
| Wire Gauge | 24 AWG (signal), 18 AWG (power) |
| Shielding | Overall braided copper shield + individual pair shields |
| Shield Ground | Connected at drive end only (drain wire) |
| Operating Temperature | -20°C to +80°C |
| Bend Radius (Min) | 5x cable diameter |
| Voltage Rating | 300 V |
| Compliance | CE, UL, CSA |
Functional Features:
- Pre-wired for EnDat 2.2 / BiSS-C protocol pinout
- EMI/RFI shielding for industrial environments
- Strain relief at both connector ends
- Color-coded wires per Kollmorgen standard
Advantages:
- Eliminates wiring errors during installation
- Guaranteed signal integrity for high-resolution encoders
- IP67 connectors protect against dust and water ingress
Applicable Industries:
All Kollmorgen servo motor applications requiring encoder feedback
Material Composition:
- Conductors: Oxygen-free copper (OFC)
- Insulation: Polyurethane (PUR) jacket
- Shield: Tinned copper braid (85% coverage)
- Connectors: Nickel-plated brass, silicone seals
Installation Requirements:
- Route cable away from high-current power cables (min 100 mm separation)
- Secure with cable clamps every 500 mm
- Do not exceed minimum bend radius
- Terminate shield drain wire to drive chassis ground only
Usage Notes:
- Do not cut or modify cable; use full length or order custom
- Replace immediately if jacket is damaged
- Verify pinout with multimeter before connecting to drive
