Digital guide
You are here:
Kollmorgen CE06560
Product Classification: Custom Cabling Assembly (Drive-to-Motor)
Product Overview:
The CE06560 is a pre-configured power and feedback cable assembly designed for connecting Kollmorgen servo drives to compatible servo motors. It includes motor power cables, encoder/resolver cables, and braking cables in a single harness.
Detailed content
Technical Specifications:
| Parameter | Value |
|---|---|
| Part Number | CE06560 |
| Cable Type | Servo motor cable assembly |
| Motor Power Conductors | 3× UL-rated, 6 AWG (or per motor spec) |
| Brake Cable | 2× 18 AWG (if brake equipped) |
| Encoder Cable | Shielded twisted pair, 24 AWG, with ferrite cores |
| Resolver Cable | 6-conductor shielded (if resolver) |
| Connector — Drive Side | M23 or Amphenol 8-pin circular (per drive) |
| Connector — Motor Side | M23 or MS connector (per motor) |
| Shielding | Overall braid + individual pair shield |
| Cable Length | Custom (typical 3–10 m) |
| Voltage Rating | 600 VAC |
| Temperature Rating | -20°C to +80°C (flex), +105°C (fixed) |
| Bend Radius (min) | 5× cable diameter (fixed), 8× (flex) |
| Compliance | UL 2556, CE, RoHS |
Applicable Industries:
- All Kollmorgen servo motor applications
Installation Requirements:
- Route cables away from high-current power lines (min 100 mm separation)
- Use cable clamps at 500 mm intervals
- Ground shield at drive end only (single-point grounding)
Usage Notes:
- Do not exceed rated bend radius
- Replace immediately if insulation is damaged
- Verify pin-out matches drive and motor configuration before energizing
