Digital guide
You are here:
KOLLMORGEN CE06200-2C1105
Product Introduction:
The CE06200-2C1105 is a communication adapter module that enables Ethernet/IP (ODVA-compliant) connectivity for Kollmorgen AKD and AKM series servo drives. The “2C” indicates a dual-port configuration (one port for drive, one for daisy-chain), and “1105” specifies the firmware revision and configuration set. It allows Allen-Bradley/Rockwell PLCs to communicate with Kollmorgen drives over standard Ethernet/IP.
Detailed content
Technical Specifications:
| Parameter | Value |
|---|---|
| Module Series | CE06200 |
| Communication Protocol | Ethernet/IP (CIP Motion + CIP I/O) |
| Compatible Drives | AKD-P, AKD-T, AKM2G, AKM3G, AKM4G |
| Ports | 2× RJ45 (10/100 Mbit/s) |
| Network Topology | Star or daisy-chain |
| Motion Data Rate | 1 ms (1 kHz) — configurable to 250 µs |
| I/O Data | Up to 32 bits input / 32 bits output |
| EDS File | Available from Kollmorgen (ODVA-registered) |
| Power Supply | 24 VDC from drive (via connection cable) |
| Current Draw | 0.8 A (max) |
| Dimensions (W×H×D) | 45 × 70 × 25 mm |
| Weight | 0.12 kg |
| Operating Temperature | 0°C to +50°C |
| IP Rating | IP20 |
| Certifications | CE, UL, cUL |
| LED Indicators | Power (green), Communication (green), Error (red) |
| Firmware Version | 1.1.05 (as per model suffix) |
Functional Features:
- Ethernet/IP explicit messaging — full drive parameter access from PLC
- CIP Motion profile — coordinated multi-axis motion with Allen-Bradley Logix controllers
- Dual RJ45 ports — one to PLC, one to next drive (daisy-chain)
- Hot-swappable — can be replaced without powering down drive (with caution)
- EDS/CIP file support — plug-and-play in Studio 5000 / RSLogix
Applicable Industries:
- Rockwell/Allen-Bradley PLC-based packaging lines
- Automotive assembly (welding, bonding)
- Food and beverage (CIP-compliant washdown lines)
- Pharmaceutical manufacturing
Model Series: CE06200 — Communication Adapter Series
Installation Requirements:
- Mount on DIN rail (TS35) adjacent to AKD drive
- Connect to drive via CE06200-specific cable harness (included)
- Ethernet cable: CAT5e/CAT6, max 100 m to PLC
- Assign unique IP address on Ethernet/IP network
- Terminate daisy-chain with 120 Ω resistor if last device
Usage Notes:
- Requires Studio 5000 v30+ or RSLogix 5000 v20+ for configuration
- Update firmware via Kollmorgen Workbench before first use
- Do not exceed 32 devices on single Ethernet/IP segment without switch
- Verify scan time ≤ 1 ms for smooth motion — increase if jitter occurs
