Digital guide
You are here:
Kollmorgen CE03261-00000012
-
Product Name: SERVOSTAR CD Series Servo Drive (CE03261 variant, 3A class)
-
Product Introduction: The CE03261 belongs to the CD (Compact Drive) Series II family, typically configured for lower-power single/three-phase AC input motor control using analog/digital interfaces; the extended numeric suffix often denotes firmware/hardware revision or custom config.
Detailed content
-
Technical Specifications & Performance Parameters:
-
Nominal Current: 3 A continuous (rated ~120W power stage)
-
Input Voltage: 110–230 VAC, 47–63 Hz (single or three-phase)
-
Output Power: ~0.89 kVA (1-phase), ~1.1 kVA (3-phase at 115V)
-
Undervoltage Threshold: ~90 VDC, Overvoltage ~430 VDC
-
Feedback: Integrated incremental encoder support (up to 3 MHz quadrupled, 10M counts/cycle), Hall-effect compatible
-
Control Interface: Analog ±10V, digital I/O
-
Protection: Overcurrent, overvoltage, undervoltage, thermal
-
Operating Temp: 0–45°C typical
-
IP Rating: IP20
-
-
Function Features:
-
Auto-configuration of encoder types (with/without index).
-
Index pulse offset capability.
-
Compact footprint for space-constrained panels.
-
-
Applications: Light-duty automation, conveyor segments, small pick-and-place, lab equipment.
-
Material & Structure: Metal enclosure with finned heatsink, PCB-mounted terminals, encoder header.
-
Working Principle: Analog/digital command converted to PWM duty cycle; H-bridge/inverter stage drives motor phases; encoder feedback used for commutation and position/speed loop closure.
-
Installation Requirements: DIN rail or panel mount; ensure ventilation; separate low-voltage signal wires from power lines.
-
Precautions: Verify encoder wiring before powering motor; do not exceed 230VAC input; long motor cable runs may require additional filtering; confirm custom suffix configuration matches existing system parameters.
