Digital guide
You are here:
Kollmorgen CE03251
Model CE03251: Typically a single-axis PWM servo amplifier, 3 A class (≈1.2 kW), 1×220 VAC or 3×208 VAC input depending on exact sub-version.
Description & Function:
Compact, DIN-rail or panel-mount servo amplifier providing torque/velocity control via ±10 V analog command or step/direction. Compatible with AKM mini-series and Goldline small-frame motors. Often used as a cost-effective stand-alone drive.
Detailed content
Typical Specifications (representative for CE-series 3 A unit):
-
Input Supply: 1 × 200–240 VAC or 3 × 208 VAC (check nameplate)
-
Continuous Output Current: ~3 A RMS (≈0.75 kW continuous, 1.2 kW peak)
-
Control Modes: Torque, Velocity (some models Position via external controller)
-
Command Interface: ±10 V analog, or PWM/step-direction
-
Feedback Supported: Incremental encoder, resolver (model dependent)
-
Digital I/O: Enable, Fault Reset, Ready contacts
-
Protection: Over-current, over-voltage, under-voltage, over-temperature, motor phase loss
-
Mounting: DIN rail or panel; often IP20
-
Cooling: Natural convection
-
Certifications: CE, UL
Notes:
-
This is an older/compact product line; refer to original Kollmorgen CE-series manualfor exact jumper settings and tuning procedures.
-
Best paired with AKM2x/AKM3x small-frame motors or Goldline B-1xx/B-2xx mini motors.
-
Not intended for high-power or multi-axis coordinated motion.
Applications: Small labeling machines, medical analyzers, lab automation, light pick-and-place.
