Technical Specifications:

• Part Number: C062C-13-3305
• Cable Type: Hybrid — Power + EnDat 2.2
• Conductors: 3 × 2.5 mm² (power) + 4 × 0.14 mm² twisted pair (encoder) + 1 × 0.5 mm² (brake) + shield
• Cable Length: 5 meters (standard for this config)
• Connector A (Motor Side): M23, 12-pin (male)
• Connector B (Drive Side): M23, 12-pin (female) or custom per drive
• Shielding: Overall braided shield + individual pair shields
• Voltage Rating: 300 VAC / 500 VDC
• Current Rating: 10 A per power conductor
• Operating Temperature: -20°C to +80°C
• Bend Radius (Fixed): 75 mm minimum
• Bend Radius (Flexible): 5× cable diameter minimum
• IP Rating: IP67 at connectors
• Standards Compliance: CE, UL, RoHS

Key Features:

• Single-cable solution — eliminates separate power and feedback wiring
• EnDat 2.2 compatible — supports 16-bit single-turn absolute feedback
• EMI-optimized shielding — braided + foil dual shield
• Pre-tested at factory — verified continuity, insulation resistance, and signal integrity

Material Composition:

• Conductors: Oxygen-free copper (OFC)
• Insulation: Cross-linked polyethylene (XLPE)
• Outer Jacket: Polyurethane (PUR) — oil and abrasion resistant
• Shield: Tinned copper braid (coverage ≥ 85%)
• Connectors: Nickel-plated brass with silicone sealing

Applicable Industries:
All Kollmorgen servo motor applications requiring EnDat 2.2 feedback.

Installation Requirements:

• Route cable away from high-current power lines (minimum 100 mm separation)
• Secure cable with clamps every 500 mm
• Do not twist or kink the cable during installation

Usage Notes:

• Verify pin assignment matches drive and motor before connecting
• Do not cut or modify the cable — use factory-length assemblies only
• Replace immediately if outer jacket is damaged