Digital guide
You are here:
Kollmorgen BDS5-210-00010-404B-2-020
Product Introduction:
The BDS5 series are compact digital drives primarily for stepping motors but also capable of controlling brushless DC/AC servo motors in indexed or analog mode. The BDS5-210-00010-404B-2-020 is a 240 VAC input, 10 A peak drive with specific I/O and feedback configuration (“404B” = I/O config; “2-020” = firmware/cable option).
Detailed content
Typical Specifications:
-
Input Voltage: 100–240 VAC 1-ph or 208–240 VAC (check label; 210 indicates ~240 V class)
-
Continuous/Peak Current: ~5 A cont. / 10 A peak (depending on step resolution)
-
Step Resolution: microstepping up to 256× (for stepper mode)
-
Control Modes: Step/direction, CW/CCW pulse, ±10 V analog (servo mode on capable variants)
-
Feedback (if servo mode): encoder or resolver (option-dependent)
-
Protection: Over-current, over-voltage, under-voltage, over-temp, stall detection
Features:
-
Compact DIN-rail mountable
-
Auto-tuning for optimum torque/smoothness in stepper mode
-
Built-in regenerative capability (with external resistor option)
-
LED status indicators for faults and enable state
Applications: Indexing tables, XY stages, feeder mechanisms, bottling/capping machines where step motor or small servo is used.
Installation Notes: Use shielded motor cables; set dip-switches or use setup software for current limit and microstep; ensure proper heat sinking or ventilation.
