Digital guide
You are here:
Kollmorgen B-804-BA91-TE1-008
-
Product Name: Goldline B-Series Low Inertia Brushless Servo Motor
-
Product Introduction: Part of the Goldline legacy series designed for rapid acceleration and deceleration applications requiring high torque density. The B-804 denotes an 80-frame size with stack length 4.
Detailed content
-
Technical Specifications:
-
Rated Voltage: 230 VAC (Line to Line)
-
Continuous Torque (Tc): ~78.6 N-m (58 lb-ft) at 40°C
-
Peak Torque (Tp): ~232 N-m (171 lb-ft)
-
Rated Speed: 1500 – 2000 RPM (depending on winding)
-
Continuous Current (Ic): ~35 – 48 Arms
-
Peak Current (Ip): ~108 – 147 Arms
-
-
Functional Features: Neodymium iron boron permanent magnets for high power density; low inertia rotor for dynamic response; built-in thermostat for thermal protection.
-
Structural Characteristics: NEMA/Metric mount compatible; IP65 rated sealing options; Class H insulation; rear shaft extension available.
-
Feedback: BA91 typically indicates specific resolver or encoder feedback configurations (e.g., Bayonet connector with resolver).
-
Application Scenarios: High-speed packaging, printing presses, semiconductor handling where low inertia mismatch is critical.
-
Material Composition: Laminated steel stator, rare-earth permanent magnets, anodized aluminum housing.
-
Installation Requirements: Standard foot or flange mounting; ensure grounding via motor frame terminal.
-
Usage Notes: Must be driven by compatible Kollmorgen amplifiers (e.g., BDS4, S300/S600 series); avoid exceeding 320 VDC bus maximum.
