Digital guide
You are here:
Kollmorgen B-604-C-B1
Product Brief:
High-torque-density, 3-phase permanent magnet synchronous servo motor (PMSM) from the Goldline B family. Rugged cast-iron/laminated frame with integral fail-safe electromagnetic brake and brushless resolver feedback, intended for heavy-duty industrial motion.
Detailed content
Key Technical Specifications:
-
Rated Power: ~8.6 kW (continuous)
-
Continuous Torque (Stall): ~33.6 Nm
-
Peak Torque: ~106 Nm (typical for B-604 family)
-
Continuous Current: ~33–38 A (winding dependent)
-
Peak Current: ~114.8 A
-
Maximum Speed: 4300 rpm (windings dependent)
-
Brake Type: Electromagnetically released fail-safe brake, holding torque ~48 Nm
-
Feedback: 2-pole brushless resolver
-
Insulation Class: Class H (180 °C)
-
Protection: IP65 (upgradable to IP67 with shaft seal)
-
Cooling: Natural convection or forced air depending on load cycle
-
Mounting Flange: Standard NEMA/IEC metric flange, keyed shaft
Features:
-
Low-inertia rotor for fast acceleration/deceleration
-
Explosion-proof / ruggedized housing option in B-series
-
Wound for 400 VAC (typical) — check nameplate for exact winding
-
Compatible with ServoStar CD / S300 / S600 / AKD drives (with proper commutation setup)
Applications: Large CNC axes, injection molding machines, metal-forming presses, heavy material-handling gantries, marine/ offshore winches.
Installation & Notes:
-
Motor must be grounded to protective earth via PE terminal.
-
Brake releases only when 24 VDC is applied — verify brake voltage/current rating.
-
Use correct motor-to-drive commutation parameters (resolver offset) during auto-commissioning.
-
Do not exceed max. radial/axial shaft load specified in datasheet.
