Digital guide
You are here:
Detailed content
-
Technical Specifications:
-
Rated Output: 1.5 kW / 2 HP
-
Supply Voltage: 230 Vac
-
Stall Torque: 2.59 Nm (22.92 lb.in)
-
Peak Torque: 5.65 Nm
-
Rotational Speed: 6200 rpm
-
Rated Current: 5 Arms
-
Frame Size: 20 (92x92mm flange)
-
Insulation Class: Class H
-
Protection Rating: IP65
-
-
Functional Features: Pre-assembled resolver feedback, built-in thermostat for thermal protection, rear shaft extension, open keyway shaft for load coupling.
-
Material Composition: Housing constructed from engineered metal alloys with Class H insulation materials capable of withstanding high thermal stress.
-
Structural Characteristics: Low inertia rotor design, 92x92mm flange mounting pattern, bayonet connectors with mating plugs for quick disconnect.
-
Working Principle: Operates as a permanent magnet synchronous motor (PMSM) where the resolver provides rotor position feedback to a servo drive to commutate the stator windings accurately.
-
Application Scenarios: Printing presses, packaging machines, semiconductor handling, robotics requiring rapid acceleration/deceleration cycles.
-
Installation Requirements: Mount via 92x92mm flange interface; align keyway properly with coupling; ensure bayonet connectors are fully locked.
-
Usage Precautions: Do not exceed Class H thermal limits; resolver feedback must be correctly phased with the drive; IP65 rating requires sealed conduit entries to maintain ingress protection.
