Digital guide
You are here:
Kollmorgen B-202-C-23
Product Introduction:
The Goldline B-Series are low-inertia, rare-earth magnet brushless servo motors designed for 230 VAC operation. The B-202-C-23 has a 20-frame (92×92 mm flange), stack length 2, winding type C, resolver feedback, open keyway shaft, rear shaft extension, Class H insulation, and built-in thermostat.
Detailed content
Performance Specifications:
-
Rated Power: 1.5 kW (2.0 HP)
-
Rated Speed: 6200 rpm (at rated voltage)
-
Continuous (Stall) Torque: 2.59 Nm (22.92 lb·in) @ 25 °C
-
Peak Torque: 5.65 Nm (50 lb·in)
-
Continuous Current: 5.0 A RMS
-
Peak Current: 16.6 A RMS
-
Rotor Inertia: 0.996 kg·cm²
-
Winding: Type C (specific voltage/torque constant for 230 V)
-
Feedback: 2-pole resolver (pre-assembled)
-
Shaft: 14 mm dia., open keyway, rear shaft extension
-
Mounting Flange: 92×92 mm (NEMA 34 equivalent), 4×M6 holes, 100 mm PCD
-
Connector: Bayonet-type motor connector (mating plug not included)
-
Insulation: Class H (180 °C)
-
Magnet Material: NdFeB (Neodymium-Iron-Boron)
Features:
-
Low rotor inertia → rapid acceleration/deceleration
-
Thermostat embedded in windings for overtemperature protection
-
Compatible with SERVOSTAR 300/600/700 and AKD drives (with proper commutation setup)
-
UL recognized, CE compliant
Applications: Machine tool spindles (aux axes), packaging machinery, printing presses, material test stands, robotics joints requiring high acceleration.
Installation & Use:
-
Align motor to load with flexible coupling or rigid mount; verify shaft concentricity.
-
Connect resolver per Kollmorgen wiring diagram (S1/S2/R1/R2).
-
Do not exceed max radial/axial shaft load specified in full datasheet (typically ~180 N radial, ~60 N axial).
-
Allow cooling airflow; ambient –15 °C to +40 °C typical.
