Digital guide
You are here:
Kollmorgen AKM52G-CNCNR-00
Product Introduction:
High-performance permanent-magnet AC servo motor belonging to the AKM family, designed for demanding CNC, robotics, packaging, semiconductor and general automation motion axes. The AKM52G frame is a medium-size flange motor with high torque density and low rotor inertia for fast acceleration.
Detailed content
Technical Specifications:
-
Frame size: AKM52 (approx. 130 mm flange class)
-
Rated power: around 2.09 kW typical for this winding
-
Rated torque: approx. 8.43 Nm continuous
-
Rated speed: 3000 rpm, maximum speed up to 6000 rpm
-
Rated current: 4.72 Arms
-
Voltage constant matched to 400 V class drives (DC bus up to 640 VDC typical)
-
Feedback: integrated SFD-M multiturn absolute encoder, 24-bit single-turn resolution, no battery backup required
-
Shaft: straight shaft, keyway optional depending on suffix
-
Mounting: IEC-standard flange, foot or face mount compatible
-
Protection: IP64 / IP65 standard, IP67 optional
-
Insulation class: F per DIN 57530
-
Operating temperature: -30 °C to +80 °C
-
Rotor: neodymium permanent magnet, optimized magnetic circuit for low cogging
-
Vibration class: N per DIN EN ISO 2373
Functional Characteristics:
Plug-and-play recognition with Kollmorgen AKD and S700 drives, high dynamic response, energy-efficient design, optional holding brake, resolver or Hiperface feedback substitution possible in other suffix variants.
Application Scenarios:
CNC machining centers, multi-axis machine tools, robot joints, AGV drive wheels, electronic assembly, lithium battery winding/tension control, printing presses.
Installation Requirements:
Mount on rigid machine flange with correct concentricity, avoid shaft radial load beyond catalog limit, use shielded motor cable, separate power and feedback routing, ensure cabinet or motor ambient stays within temperature range, verify brake voltage if brake option present.
Usage Notes:
Do not disconnect encoder cable under power, avoid mechanical shock to encoder, check bearing lubrication cycle in high-duty cycles, verify drive parameter auto-tuning after first commissioning.
