Digital guide
You are here:
Detailed content
-
Technical Specifications:
-
Frame: AKM4
-
Stack: E
-
Stall Torque (typical for this tag): 4.7 Nm
-
Rated Speed: 2500 rpm (winding dependent)
-
Bus Voltage: 540 VDC class winding
-
Stall Current: 2.73 A
-
Rotor Inertia: 2.09 kg·cm²
-
Mass: 5.0 kg
-
Brake: 24 VDC, 6 Nm holding
-
Feedback: C2 = Resolver (2-pole)
-
Shaft: 15.875 mm diameter, 52.40 mm length, special flange pattern (73.02 mm pilot dia, 98.43 mm bolt circle)
-
-
Features: High dynamic response, magnetic spring-applied brake, low cogging, direct mate to AKD/S700.
-
Applications: Vertical lift axes, clamping devices, medical actuators, lab automation where hold-in-power-loss is mandatory.
-
Installation Notes: Brake must be wired to supervised 24 VDC supply; discharge brake energy through drive or external circuit on fault.
-
Precautions: Brake is not a safety stop device by itself; do not run motor with brake energized; resolver offset must be calibrated.
