Digital guide
You are here:
Detailed content
-
Technical Specifications:
-
Rated Output: 1.48 kW / 1.98 HP
-
Stall Torque: 3.53 Nm (31.2 lb.in)
-
Nominal Torque: 2.35 Nm
-
Rotational Speed: 6000 rpm
-
Max Bus Voltage: 640 Vdc
-
Rated Current: 4.8 Arms (continuous at 100°C winding ΔT)
-
Flange Size: 84x84mm IEC(Frame size 42)
-
Shaft: 40mm smooth shaft (no keyway)
-
Feedback: 24-bit SFD (4-wire)
-
Connectors: 2 x angled rotatable M23 SpeedTec Ready connectors
-
Protection: IP65
-
-
Functional Features: Low cogging for smooth motion, high torque density, PTC thermistor temperature sensor, resolver/SFD feedback compatibility.
-
Material Composition: Stator with high-grade laminations, permanent magnet rotor (rare earth), Class H or F insulation, anodized aluminum housing.
-
Structural Characteristics: Smooth shaft (stack length 2), rear or side M23 connectors rotatable for cable routing flexibility, IEC metric flange.
-
Working Principle: A 3-phase PMSM where electronic commutation is achieved via the SFD feedback transmitting absolute rotor position to the drive, which modulates phase currents accordingly.
-
Application Scenarios: Packaging, printing, medical devices, general automation requiring smooth low-speed operation due to low cogging.
-
Installation Requirements: Flange mount on 84x84mm pattern; ensure smooth shaft coupling does not induce axial loads; rotate M23 connectors to desired orientation before tightening.
-
Usage Precautions: SFD feedback requires compatible AKD or newer drives; IP65 is maintained only with mated connectors; avoid shaft impacts on smooth shaft; monitor PTC temperature limits.
