Digital guide
You are here:
Detailed content
-
Technical Specifications:
-
Stall Torque: 2.88 Nm
-
Peak Torque: 10.22 Nm
-
Rotational Speed: Up to 8000 rpm
-
Rated Current: 5.62 A (stall, continuous)
-
Max Bus Voltage: 480 Vac / 320 Vdc referenced
-
Flange Size: 70x70mm IEC (Frame 33)
-
Shaft: 14mm diameter with keyway (pilot 60mm, bolt circle 75mm)
-
Feedback: Resolver (accuracy ±8 min)
-
Brake: Without holding brake (NR code)
-
Protection: IP54 (IP65 optional with shaft seal)
-
Temperature Sensor: PTC
-
Inertia: 0.85 kg·cm²
-
Poles: 8 (4 pole pairs)
-
-
Functional Features: High torque density, low cogging, resolver feedback for rugged environments, PTC thermal protection.
-
Material Composition: Aluminum housing, rare-earth permanent magnets, Class F/H insulation system.
-
Structural Characteristics: Keyed shaft, 70x70mm flange, 2 x M23 angular SpeedTec Ready rotatable connectors (power & feedback), rear or side exit configurable.
-
Working Principle: Operates as a PMSM; resolver generates analog signals proportional to rotor angle, processed by drive for commutation and closed-loop control.
-
Application Scenarios: Material handling, packaging, labeling machines, small robotic joints, general automation where resolver robustness is preferred over optical encoders.
-
Installation Requirements: Mount on 70x70mm flange; align keyway with coupling; route M23 connectors to desired angle and lock; ensure PTC wired to drive for thermal monitoring.
-
Usage Precautions: Resolver wiring must be phased correctly (S1/S2/S3/S4) to avoid erratic operation; IP54 is not washdown rated unless IP65 seal option is present; no brake means external holding mechanism needed if load backdrives.
