Digital guide
You are here:
Kollmorgen AKM22E-ANB2AB0
Product Name: AKM-Series Brushless Servo Motor (with Brake)
Model Series: AKM-Series (Advanced Kinetic Motor)
Product Overview:
Compact brushless servo motor with integrated holding brake and single-turn absolute encoder. AKM series represents Kollmorgen’s cost-optimized servo motor line with full servo performance.
Detailed content
Technical Specifications:
| Parameter | Value |
|---|---|
| Frame Size | 22 (57mm Flange) |
| Flange Diameter | 57mm |
| Length Code | E (Extended stack) |
| Winding Code | AN |
| Brake Code | B2 (24VDC Holding Brake) |
| Connector Code | AB (M23, 12-pin) |
| Encoder Code | 0 (Single-turn Absolute, BiSS-C) |
| Encoder Resolution | 16,384 counts/rev (14-bit) |
| Continuous Torque | 0.44 Nm |
| Peak Torque | 1.32 Nm |
| Max Speed | 5,000 RPM |
| Rated Voltage | 48 VDC (winding AN) |
| Brake Torque | 2.0 Nm |
| Brake Voltage | 24 VDC |
| Motor Weight | Approx. 0.72 kg (with brake) |
| Protection Rating | IP65 (with connector) |
Material Composition:
- Stator: Non-oriented silicon steel, epoxy-potted
- Rotor: NdFeB permanent magnets, NiCuNi plated
- Housing: Die-cast aluminum, anodized black
- Shaft: Hardened alloy steel (AISI 4340), keyed
- Brake: Spring-applied, electromagnetically released
Structural Features:
- 57mm flange with 4× M4 mounting holes
- M23 connector (12-pin) carrying power + encoder + brake
- Keyed shaft (DIN 6885-1, 14×9×40mm)
- IP65 seal on connector and shaft
Working Principle:
Sinusoidal commutated brushless motor. BiSS-C single-turn absolute encoder provides 14-bit position feedback on every power-up (no homing needed). Drive performs FOC (Field-Oriented Control). Holding brake is spring-loaded; 24VDC energizes coil to release brake for motion.
Key Advantages:
- BiSS-C encoder — high-speed serial, noise-immune
- Holding brake included — vertical axis ready out of box
- 57mm flange — compact footprint
- Single-cable connection — motor, brake, encoder on one M23
- Cost-optimized AKM line — full servo performance at lower cost
Applicable Industries:
- Light industrial automation
- Medical device actuators
- Valve automation
- Small conveyor sections
- AGV drive wheels
Installation Requirements:
- Mount with 4× M4 bolts, torque to 2.5 Nm
- Shaft coupling: ≤ 0.03mm TIR
- Ambient: -10°C to +45°C
- Minimum 40mm clearance all sides
Usage Precautions:
- Brake must be energized before motion starts — running with brake engaged damages motor
- Do not exceed 5,000 RPM continuously
- BiSS-C encoder requires termination resistor (120Ω) if cable > 3m
- Do not use on axes requiring multi-turn position — encoder is single-turn only
