Digital guide
You are here:
Kollmorgen AKD-P01207-NBE
Product Name: Kollmorgen AKD-P01207-NBE — Servo Drive (AKD-P Series)
Product Introduction: The AKD-P01207-NBE is a servo drive from Kollmorgen’s AKD-P programmable series, configured for EtherNet/IP communication with enhanced networking capabilities.
Model Series: AKD-P (Advanced Kinetics Drive — Programmable)
Detailed content
Product Category: Multi-Axis Servo Drive (Single-Axis Module)
Key Specifications:
| Parameter | Value |
|---|---|
| Continuous Current per Axis | 7.0 A RMS |
| Peak Current per Axis | 21.0 A (3× rated) |
| DC Bus Voltage | 24–60 V DC (nominal 48V) |
| Number of Axes | 1 (single-axis module) |
| Control Modes | Position, Velocity, Torque, Cyclic Synchronous |
| Feedback Support | EnDat 2.2, Hiperface DSL, BiSS-C, SSI, Incremental |
| Primary Communication | EtherNet/IP (CIP Motion) |
| Secondary Communication | EtherCAT, PROFINET, CANopen, Modbus |
| PWM Frequency | 16 kHz (configurable to 32 kHz) |
| Digital I/O | 16 inputs / 8 outputs |
| Analog I/O | 2 inputs / 2 outputs |
| Safety Functions | STO, SS1, SLS, SLP, SOS (SIL3 / PL e) |
| Operating Temperature | 0°C to +50°C |
| Dimensions (W×H×D) | ~48 × 120 × 110 mm |
| Weight | ~0.55 kg |
| Certifications | CE, UL, cUL, TÜV, RoHS |
| Part Suffix | NBE = Network + EtherNet/IP + Enhanced |
Functional Features:
- EtherNet/IP native — seamless integration with Allen-Bradley / Rockwell platforms
- CIP Motion profile — Vendor-specific for RSLogix / Studio 5000
- Built-in web server with real-time status dashboards
- Electronic gearing ratio up to 1:10000
- Adaptive feedforward for load disturbance rejection
Working Principle: Identical to AKD-P02406-NCP with EtherNet/IP as primary fieldbus. CIP Motion commands traverse the network to the drive’s motion engine. Encoder feedback closes all servo loops internally.
Advantages:
- Native Rockwell integration — no gateway required
- 7A continuous rating — handles medium-to-heavy loads
- Full safety suite — SIL3 certified without external components
- Dual-protocol — EtherNet/IP primary, EtherCAT secondary for expansion
Applicable Industries:
- Rockwell-based automation lines
- Automotive body shops
- Heavy packaging machinery
- Print and convert equipment
- Material handling systems
Installation Requirements:
- DIN rail 35mm mounting
- EtherNet/IP cable: shielded CAT5e/CAT6, max 100m per segment
- Configure drive IP address via boot-up web page or AKD Workbench
- Separate power and signal grounding
Usage Notes:
- Set CIP Motion instance in RSLogix 5000 before commissioning
- Use 120Ω termination resistor at each end of EtherNet/IP daisy chain
- Perform auto-tune after any mechanical coupling change
