Digital guide
You are here:
Kollmorgen AKD-P00606-NCE
Product Description:
The AKD-P00606-NCE is a panel-mount AKD servo amplifier from Kollmorgen’s AKD platform. “P” = Position indexer (built-in motion tasks), “00606” = 6 A continuous / 18 A peak @ 120/240 VAC (85–265 VAC input), “N” = Standard I/O, “C” = EtherCAT® communication, “E” = 24 VDC logic supply included in standard, last “N” = no extra options.
Detailed content
Specifications:
-
Input Supply: 1Ø or 3Ø 85–265 VAC (120/240 VAC nominal), 50/60 Hz
-
Continuous Output Current (RMS): 6.0 A
-
Peak Output Current: 18.0 A (5 s)
-
Continuous Output Power: ≈ 2000 W
-
DC Bus Capacitor: Internal; regen resistor connectable externally
-
Control Logic: 24 VDC (supplied externally)
-
Communication / Motion Bus: EtherCAT (CoE — CANopen over EtherCAT)
-
Feedback Devices Supported: SFD, SFD3, EnDat 2.1/2.2, BiSS-C, Hiperface, Hiperface DSL, sin-cos, incremental A/B/Z, resolver
-
Position Loop Bandwidth: up to 250 Hz
-
Velocity Loop Bandwidth: up to 1000 Hz
-
Current Loop Update: 0.67 µs (1.5 MHz sampling)
-
Onboard Memory: NVRAM for parameters & programs
-
Safe Torque Off (STO): Included, SIL3 / PLe
-
Dimensions (H×W×D): approx. 196 × 72 × 187 mm
-
Weight: ≈ 2.0 kg
Features:
-
Plug-and-play motor recognition with Kollmorgen AKM / AKM2G / MSK
-
Wizard-based autotuning, Bode plot analysis
-
Built-in indexer for stand-alone motion (no PLC needed)
-
Kollmorgen WorkBench GUI for setup, oscilloscope, and diagnostics
-
TCP/IP service channel for PC connection alongside EtherCAT
Applications:
-
High-speed pick-and-place, labeling, converting, electronics assembly, printing, medical device manufacturing
Installation & Notes:
-
Mount vertically on DIN rail or panel with adequate clearance for airflow (≥50 mm above/below)
-
Use shielded motor & feedback cables, terminated to PE
-
Connect 24 VDC logic before enabling mains
-
Set node address via DIP switches or EtherCAT master
-
Regen resistor sizing required if decelerating large inertias frequently
