Digital guide
You are here:
Kollmorgen AKD-P00306-NBCUS
-
Product Name: AKD Position Indexer Servo Drive, 3 A 240 VAC, No onboard fieldbus option card (N), Basic/Positioner firmware (P), Rotary connector (R implied by US mech), US config
-
Product Introduction: Single-axis AKD-P drive providing standalone position indexing (target position tables, registration, gear-in) without needing external PLC. NBCUS defines supply/connector/region.
Detailed content
-
Technical Specifications:
-
Supply: 120/240 VAC 1/3-phase (85–265 V)
-
Output: 3 A cont., 9 A peak, 1.1 kW
-
Logic: 24 VDC
-
Current loop bandwidth: 2.5–4 kHz
-
Velocity loop: up to 1000 Hz
-
Position loop: 1–250 Hz
-
I/O: 7 digital in, 2 digital out, 1 relay fault, 1 analog in/out, STO
-
Feedback: all AKD-supported types
-
-
Functional Features: Wizard-based autotune; electronic gearing; registration; Modbus/TCP service; optional slot for EtherCAT/CANopen/Profinet.
-
Application Scenarios: Retrofit of步进 axes, conveyor indexing, standalone rotary table.
-
Construction & Materials: Same AKD mechanical platform as AKD-M but no controller CPU daughterboard.
-
Installation Requirements: Ground PE properly; separate signal and power shields; 24 VDC regulated.
-
Usage Notes: “N” means no bus card fitted; adding EtherCAT later requires option board; P firmware cannot run KAS PLC logic.
