Digital guide
You are here:
KOLLMORGEN AKD-P003007-NB
Product Classification: Digital AC Servo Drive — AKD Series, 3 A Continuous, No Brake
Product Introduction:
The AKD-P003007-NB is a compact single-axis digital servo drive from the AKD family rated at 3 A continuous current with no brake output and standard communication configuration (no fieldbus — step/direction + analog). It is designed for cost-sensitive, single-axis applications where fieldbus communication is not required.
Detailed content
Technical Specifications:
| Parameter | Value |
|---|---|
| Drive Series | AKD |
| Continuous Current Rating | 3.0 A RMS |
| Peak Current Rating | 9.0 A (3× continuous, 10-second) |
| Input Voltage | 100–120 VAC (single-phase) or 200–240 VAC (three-phase) |
| Input Frequency | 47–63 Hz |
| DC Bus Voltage | 170 VDC (nominal) |
| Max Output Voltage | 80 VAC (line-to-line) |
| Communication Protocol | Step/Direction + Analog (no fieldbus) |
| Control Modes | Position, Velocity, Torque |
| Position Loop Update Rate | 125 µs (8 kHz) |
| Velocity Loop Update Rate | 125 µs |
| Torque Loop Update Rate | 62.5 µs (16 kHz) |
| Safety Functions | STO (SIL2/PLc) |
| Brake Output | No (NB = No Brake) |
| Digital I/O | 4 inputs / 2 outputs (24 VDC) |
| Analog I/O | 1 analog input (±10 V) / 1 analog output (±10 V) |
| Encoder Power Supply | 5 VDC, 0.3 A |
| Protection Class | IP20 (chassis mount) |
| Cooling Method | Conduction (no fan — IC00) |
| Dimensions (W×H×D) | 72 × 90 × 110 mm |
| Weight | 0.85 kg |
| Ambient Temperature | 0°C to +40°C |
| Certifications | CE, UL, cUL |
Functional Features:
- Step/Direction interface — direct PLC or motion controller connection
- Analog velocity/torque command — ±10 V input
- Compact footprint — smallest AKD form factor (72 mm width)
- STO safety — Safe Torque Off without external components
- No fan design — silent operation, zero maintenance
Applicable Industries:
- Simple axis positioning (conveyors, gates)
- Laboratory equipment
- Small CNC routers
- Textile tension control
- Fan/pump speed control
Model Series: AKD — Compact Digital Servo Drive Series (3 A class)
Installation Requirements:
- Mount on DIN rail (TS35) or panel-mount with 2× M4 screws
- Input power: 1.5 mm² minimum for 120 VAC
- Step/Direction: differential line driver (RS-422) — max 10 m cable
- Analog inputs: shielded twisted pair — max 5 m
- Ground: PE ≥ 1.5 mm²
Usage Notes:
- No fieldbus — all control via step/direction pulses + analog signals
- Max pulse frequency: 500 kHz (position mode)
- No brake output — external brake required for vertical loads
- Derate current by 10% per 10°C above 40°C ambient
