Digital guide
You are here:
Kollmorgen AKD-N00607-DBE
-
Product Name: AKD-N Decentralized Servo Drive (6 A, 480 V class, EtherCAT, IP67)
-
Product Introduction: Part of the AKD decentralized (drive-on-machine) system powered from an AKD-C DC-bus supply via hybrid cable. Rated for 6 A continuous / 18 A peak, mounted directly on the machine frame close to the motor.
Detailed content
-
Technical Specifications:
-
Continuous Output Current: 6 A RMS
-
Peak Output Current: 18 A RMS (5 s)
-
DC Bus Supply: 560–680 V DC (max 800 V DC)
-
Continuous Output Power: approx. 4000 W class
-
Control Logic: via AKD-C DC bus + EtherCAT motion bus
-
Feedback Supported: SFD, SFD3, EnDat 2.1/2.2, BiSS-C, HIPERFACE, HIPERFACE DSL, 1 Vpp sincos, incremental encoder, hall
-
Fieldbus: EtherCAT (integrated)
-
I/O: 3 programmable digital inputs, 1 digital output, 1 fault relay (optional)
-
Protection: IP67 (front), IP20 (connector side)
-
Dimensions: 75 × 130 × 252 mm
-
Option Suffix “-DBE”: Standard DB variant (single-cable capable option dependent), EtherCAT onboard, no local STO
-
-
Functional Features: Decentralized installation reduces cabinet size and motor cable length; single hybrid cable for power + EtherCAT + feedback; wizard-based autotuning; high-bandwidth current loop; plug-and-play with AKM and other Kollmorgen motors.
-
Application Scenarios: Conveyor sections, packaging machines, material handling gantries, distributed multi-axis machines where cabinet space is limited.
-
Installation Requirements: Mount on machine frame with standing orientation preferred; hybrid cable routing separated from high-noise mains; 24 V standby not required (supplied by AKD-C); earth braid terminated at both ends properly.
-
Usage Notes: Not a standalone AC-input drive; must connect to AKD-C DC bus. Do not run without proper EtherCAT termination. IP67 body but rear connectors must use correct sealed mating plugs.
