Digital guide
You are here:
Kollmorgen AKD-M00307-MCE
-
Product Name: AKD Series Multi-Axis Master Servo Drive with Motion Card (EtherCAT)
-
Product Introduction: A high-performance Ethernet-based servo drive from the AKD family, featuring an integrated 0.8 GHz motion card for multi-axis master control, supporting EtherCAT and various high-resolution feedback protocols.
Detailed content
-
Technical Specifications:
-
Supply Voltage: 240–480 V AC (3-phase, 380/400/415/440 V nominal)
-
Rated Current: 3 A RMS
-
Rated Output Power: 2 kW (2000 W)
-
Protection Rating: IP20
-
Operating Temperature: 0 to +40 °C
-
-
Functional Features: Internal regenerative braking resistor; supports EtherCAT, EnDat, BiSS, HIPERFACE, Sine/Cos encoders; 13 digital inputs (24 Vdc), 4 digital outputs (24 Vdc floating), 1 analog input (-10/+10 Vdc, 16-bit), 1 analog output (-10/+10 Vdc, 16-bit); Safe Torque OFF (STO).
-
Application Scenarios: Complex multi-axis coordinated motion systems, CNC machinery, robotics, packaging, and printing machines requiring EtherCAT communication.
-
Performance Parameters: High bandwidth torque loop (0.67 µs current loop); supports up to 27-bit feedback resolution; dual-processor architecture for fast tuning.
-
Structural Characteristics: Detachable screw terminals (PWR, BRK, I/O); 9-pin D-Sub (X9 Feedback), 15-pin D-Sub (X10 Feedback); RJ25 (CAN IN/OUT); RJ45 (X5/X6 Bus).
-
Installation Requirements: 3-phase 240-480 V AC supply; requires adequate cabinet ventilation (IP20); mounting on DIN rail or panel.
-
Usage Precautions: Ensure bus voltage stays within range; configure STO properly for safety; use shielded cables for feedback and communication to avoid EMI.
