Digital guide
You are here:
Kollmorgen AKD-B00606-NCA
Product Description: “B” = Base drive version — no built-in fieldbus master; controlled via ±10 V analog command, step/direction, or internal programming. Intended for standalone or retrofit applications replacing older analog drives. “NCA” = standard I/O, no STO module, specific connector layout.
Detailed content
Specifications: Same electrical ratings as AKD-x00606:
-
Input: 85–265 VAC 1ϕ/3ϕ
-
Cont./Peak: 6 A / 18 A
-
Power: 2 kW continuous
-
Feedback: Full suite — SFD, EnDat, BiSS, SinCos, Incr, Resolver, HIPERFACE
-
Control Modes: Torque, Velocity (analog ±10 V), Position (step+dir or CW/CCW pulses)
-
I/O: 8 DI, 3 DO, 1 AI, 1 AO
-
No EtherCAT/Profinet — add option card if needed
-
WorkBench programmable for stand-alone motion sequencesApplications: Retrofit of existing machines, lab setups, standalone single-axis positioning.
8. Kollmorgen AKD-B00606-NCS (AKD Base Drive — 6 A, with Serial/Modbus TCP Option)
Product Name: Kollmorgen AKD-B00606-NCS — Base Analog Servo Drive with Modbus TCP / RS-232/485 Serial Interface
Product Description: Electrically identical to AKD-B00606-NCA but “S” suffix indicates serial communications option (Modbus RTU over RS-232/485 or Modbus TCP via RJ45 service port) enabled for basic parameter read/write and limited motion control via register mapping. No real-time motion bus (EtherCAT/Profinet).
Key Differentiator vs NCA: Communication port configured for Modbus access — useful for PLCs without motion bus or for HMI-based drive setup.
All other specs (current, power, feedback, I/O) match the AKD-x00606 family described above.
