Digital guide
You are here:
Kollmorgen AKD-B00306-NAA-N-I000
-
Product Name: AKD Series Basic Servo Drive (No Bus, Standard I/O)
-
Product Introduction: The “B” denotes basic drive without built-in motion controller; “NAA” indicates no fieldbus, standard analog/Pulse-Dir control. It is a 3A drive for cost-sensitive single-axis applications.
Detailed content
-
Technical Specifications:
-
Input Voltage: 120/240 VAC (85–265 VAC)
-
Continuous Current: 3 Arms
-
Peak Current: 9 Arms
-
Output Power: 1100 W
-
Control Interfaces: Analog ±10V, Step/Dir, CW/CCW, RS232
-
Feedback Support: Full AKD suite (SFD, EnDat, BiSS, etc.)
-
Options: I000 may denote special firmware/image or none
-
-
Functional Features:
-
Screw-terminal I/O, optically isolated
-
WorkBench GUI for setup
-
High-density torque/speed loops
-
SD card slot on some variants for backup
-
-
Application Scenarios: Standalone OEM machines, upgrading from analog drives, simple indexing tables.
-
Performance Parameters: Same loop updates as AKD standard (0.67 µs torque, 62.5 µs velocity).
-
Material & Structure: Compact enclosure (~168 mm H × 57 mm W), IP20, natural convection.
-
Working Principle: Accepts analog or pulse reference, closes local PID loops, drives motor via SVM.
-
Installation Requirements: Secure earth ground; route analog signals shielded and separated from power; DIN rail preferred.
-
Usage Precautions: Avoid ground loops in analog command; set proper gain scheduling; monitor bus voltage during regen conditions.
