Connector End 1 (Motor Side): M23, 17-pin, straight, male

Connector End 2 (Drive Side): M23, 17-pin, straight, male

Cable Type: Shielded, twisted-pair, PUR jacket

Conductor Count: 12 conductors

Wire Gauge: 24 AWG (signal), 18 AWG (power)

Shielding: Overall braided shield + individual pair shield

Voltage Rating: 300 VAC

Temperature Rating: -20°C to +80°C (continuous)

Bend Radius (Minimum): 5 × cable diameter (130 mm)

IP Rating: IP67 (mated)

Compatible Motors: AKM Series (all frame sizes)

Compatible Drives: AKD2G, AKD-P Series

Encoder Protocols: Hiperface DSL, EnDat 2.2, BiSS-C

Color: Black jacket, gray boots

Certifications: CE, UL, cUL

Key Advantages:

• 26 m length supports large machine installations (gantries, long conveyors)
• Same construction as 603-AS-BV but extended length
• Pre-terminated for plug-and-play installation

Applicable Industries:

• Large CNC machines
• Gantry robots
• Long-travel linear systems with rotary motors at remote ends
• Packaging lines with extended motor placement

Installation Requirements:

• Use cable tray or conduit for runs over 5 m
• Ground shield drain at drive end only
• Maintain 100 mm separation from power cables
• Support cable every 1 m to prevent sag

Usage Notes:

• At 26 m, signal integrity may degrade at maximum pulse frequency — reduce pulse rate if errors occur
• Do not coil cable during storage — maintain minimum bend radius
• Inspect connectors for moisture ingress annually