Technical Specifications:

• Part Number: 606-AS-FAN
• Compatible Drives: S700 Series, S300 Series
• Voltage: 24 VDC (nominal)
• Current Draw: 0.15 A (typical)
• Airflow: 2.5 CFM (cubic feet per minute)
• Noise Level: 28 dBA
• Dimensions: 60 × 60 × 25 mm (standard 60 mm fan)
• Connector: 2-pin Molex or equivalent
• Bearing Type: Sleeve bearing (long life, low maintenance)
• MTBF: 50,000 hours at 40°C ambient

Key Features:

• Direct replacement for OEM fan in S700/S300 drives
• Low noise operation — suitable for cleanroom and lab environments
• 24 VDC operation — matches drive internal supply
• Pre-wired connector — plug-and-play installation

Material Composition:

• Blades: Glass-fiber reinforced PBT (polybutylene terephthalate)
• Frame: PBT plastic
• Bearings: Sintered bronze sleeve
• Wire: 24 AWG silicone-insulated

Applicable Industries:
All industries using Kollmorgen S700/S300 drives.

Installation Requirements:

• Install in the designated fan slot on the drive heatsink
• Ensure airflow direction matches the heatsink fin orientation (arrow on fan)
• Replace if noise increases or airflow decreases

Usage Notes:

• Clean fan blades every 6 months in dusty environments
• Do not operate the drive without the fan installed — thermal shutdown will occur
• Replace immediately if bearing noise exceeds 35 dBA