Digital guide
You are here:
Honeywell 51403645-400
- Product Name: SBHM (Single Board History Module) Hard Drive Assembly for TDC 3000 DCS
- Product Introduction: A data historian component within the Honeywell TDC 3000 DCS architecture (LCN/UCN). It provides long-term historical process data archiving for SIL documentation workflows and functional safety audits.
- Technical Specifications:
- Module Designation: SBHM (Single Board History Module) Hard Drive Assembly
Detailed content
-
- Compatible Platform: Honeywell TDC 3000 DCS (LCN/UCN Architecture)
- Interface Protocol: Honeywell LCN Proprietary Bus
- Data Retention: Long-term historical process data archiving
- Firmware: Factory pre-configured; OEM-locked revision
- Operating Temperature: 0 °C to 50 °C
- Storage Temperature: -20 °C to 70 °C
- Relative Humidity: 5 % to 95 % non-condensing
- Compliance: IEC 61511, API 670, ISO 20816, ISO 9001, CE, FCC Class A
- Power: Per TDC 3000 chassis specification
- Alternate Listed Disk Specs (some supplier sources): 400 GB SATA III, 7200 RPM, 16 MB cache, 2.5″ form factor, 9 W power, 8.5 ms average seek, 6 Gbps transfer rate, -40 °C to +75 °C (confirm exact disk variant against your chassis)
- Functional Features: Long-term historical process data archiving. Tamper-evident historical records required for functional safety audits under IEC 61511. Factory burn-in tested; OEM-certified.
- Application Scenarios: Oil & gas upstream/downstream—from wellhead automation to refinery process control—where API 754 process safety performance indicator tracking and ISO 55001 asset management compliance are required.
- Structural & Material Characteristics: Single Board History Module with integrated hard drive assembly. Factory-sealed OEM packaging with anti-static shielding, moisture barrier bags, and shock-absorbing foam.
- Working Principle: Captures and archives process data from the TDC 3000 LCN/UCN network onto the integrated hard drive. Historical records are stored with tamper-evidence to support functional safety audits and regulatory compliance.
- Installation Requirements: Install in a compatible TDC 3000 chassis slot per Honeywell-approved engineering practices. Maintain ambient temperature within 0 °C to 50 °C. Ensure proper ventilation in control cabinet.
- Usage Notes: Installation must follow Honeywell’s approved engineering practices and site-specific safety management plans. It does NOT function as a Safety Instrumented System (SIS) element itself—it is a data historian. Verify firmware revision compatibility with existing TDC 3000 system before replacement.
