Digital guide
You are here:
Honeywell 51308112-005
Product Name: Analog Output Module
Product Introduction: The Honeywell 51308112-005 is a high-resolution Analog Output (AO) module designed for TDC 3000 and TPS distributed control systems. It precisely drives field actuators and control valves with current or voltage signals.
Detailed content
Technical Specifications:
- Module Type: Analog Output Card
- System Compatibility: TDC 3000, TPS, PlantScape
- Channel Count: 8 independent output channels
- Output Signal Range: 4–20 mA, 0–20 mA, 0–10 VDC, 1–5 VDC
- Resolution: 12-bit digital-to-analog conversion
- Accuracy: ±0.1% of full scale
- Load Resistance: Maximum 750 Ω for current outputs
- Output Impedance: <1 Ω for voltage outputs
- Update Rate: Configurable scan rates from 125 ms to 1 second
- Operating Temperature: 0°C to 60°C ambient
- Power Consumption: Typically 0.7 A at 5 VDC
- Isolation Voltage: 500 VAC channel-to-ground dielectric strength
- Protection: Automatic current limiting on all channels (short circuit protection)
- Weight: 2000 g
Functional Features: Delivers precise analog control signals to field devices; supports both current and voltage output modes; provides individual channel isolation for system protection; enables hot-swapping for continuous process operation.
Application Scenarios: Driving control valves, actuators, and field devices in TDC 3000, TPS, and PlantScape distributed control systems; high-precision analog control applications in process industries.
Structural Characteristics: 8-channel analog output card; individual channel isolation; hot-swappable module design for continuous process operation.
Working Principle: Converts digital system commands into precise proportional analog output signals via 12-bit DAC, with configurable scan rates and automatic short-circuit protection on each channel.
Installation Requirements: Installs into compatible Honeywell TDC 3000, TPS, or PlantScape I/O chassis; hot-swappable for replacement without process shutdown.
Usage Notes: Each channel features automatic current limiting for short-circuit protection; 500 VAC channel-to-ground isolation protects the system; configure scan rates between 125 ms and 1 second based on application requirements.
