Digital guide
You are here:
Honeywell 51153818-203
Product Name: Honeywell 51153818-203 Jumper Interconnection Kit (Gray Jumpers, positions 21–30)
Product Introduction: A passive jumper kit designed for secure I/O interconnections within Honeywell TPS, TDC 2000, and TDC 3000 distributed control systems. It establishes physical electrical continuity across adjacent backplane pins for low-voltage bus signal routing.
Detailed content
Technical Specifications:
- Jumper Quantity: 21–30 wire jumpers
- Jumper Pitch: 2.54 mm (standard spacing)
- Dimensions (W × H × D): 3 × 31.3 × 27.8 cm
- Weight: 0.56 kg
- Material: Industrial-grade wire and connectors
- Operating Voltage: Standard system bus voltage (low-voltage signal)
- Operating Temperature: -20°C to +70°C
- Storage Temperature: -40°C to +85°C
- Certifications: CE, TÜV, UL508, CSA
- Color: Gray
- Origin: USA
Functional Features: Passive conductive component requiring zero power draw and no software mapping. Provides unattenuated pass-through for 4–20 mA HART loop signals and high-speed system bus communications while preserving channel-to-channel isolation.
Application Scenarios: TPS, TDC 2000, and TDC 3000 backplane signal routing; analog and digital instrumentation signal interconnection; hardware configuration in process control cabinets.
Material Composition: Industrial-grade conductor wire with termination connectors; 2.54 mm pitch.
Working Principle: Direct conductive mapping across the 2.54 mm pitch layout creates low-resistance electrical paths between designated backplane pins, patching distinct I/O nodes without structural alteration to the backplane.
Installation Requirements: Power down the primary DCS chassis before inserting or removing jumpers. Align the 2.54 mm pitch connector blocks perfectly with the target pin header rows. Route wire bundles away from high-voltage lines and inductive switching components.
Usage Notes: Restricted to low-voltage system bus signaling and logic-level interconnection. Not for AC power circuits. Ensure connectors are fully locked to withstand vibration.
