Digital guide
You are here:
Honeywell 51153818-103
Product Name: Honeywell 51153818-103 Jumper Kit (Violet Jumpers, positions 11–20)
Product Introduction: A jumper interconnection kit within the Honeywell 51153818 series, providing violet-colored jumpers for backplane positions 11–20 in Experion PKS, TPS, TDC 2000, and TDC 3000 distributed control systems.
Detailed content
Technical Specifications:
- Jumper Quantity: 20 pieces per kit (as documented in supplier specs)
- Jumper Type: Shunt-style with insulated cover
- Contact Material: Phosphor bronze with gold plating
- Insulation Material: High-temperature thermoplastic
- Current Rating: 2 A per contact
- Voltage Rating: 50 VDC maximum
- Contact Resistance: < 20 mΩ
- Pitch: 2.54 mm
- Operating Temperature: -40°C to +105°C
- Storage Temperature: -55°C to +125°C
- Kit Weight: 0.05 kg
- Box Dimensions: 120 × 80 × 15 mm
Functional Features: Gold-plated phosphor bronze contacts resist corrosion and provide low contact resistance. The shunt-style design with insulation cover enables safe hardware configuration without soldering. Supports I/O module address selection and analog input range configuration.
Application Scenarios: Hardware configuration and signal routing in TDC 3000 DCS and Experion PKS systems; module interconnections within automation control cabinets; field maintenance and re-configuration of legacy and modern Honeywell equipment.
Material Composition: Phosphor bronze contacts, gold plating, high-temperature thermoplastic housing.
Structural Features: Shunt-style jumper bodies with protective insulation covers; 2.54 mm standard pitch matching Honeywell backplane headers.
Working Principle: Establishes direct conductive paths across adjacent backplane pins, enabling hardware-level signal routing and module addressing without firmware changes.
Installation Requirements: De-energize the chassis before installation. Align the 2.54 mm pitch connector with the corresponding backplane header rows. Ensure the connector is fully seated to maintain contact integrity under vibration.
Usage Notes: Limit current to 2 A per contact and voltage to 50 VDC. Suitable only for low-voltage signal and logic-level interconnection. Store within -55°C to +125°C when not in use.
