Digital guide

You are here:
  1. Home
  2. GE
  3. GE VMIVME-5576 High-Speed Fiber-Optic Reflective Memory Interface

GE VMIVME-5576 High-Speed Fiber-Optic Reflective Memory Interface

  1. Hardware Architecture:
    • Core Function: VME-to-VME reflective memory interface for real-time data sharing .
    • Memory Capacity: 256 KB to 1 MB SRAM (configurable) .
    • Data Transfer Rate: Up to 6.2 MB/s .
    • Node Support: Up to 256 independent systems .
    • Bus Compatibility: VMEbus (ANSI/IEEE STD 1014-1987, IEC 821/297) .
WhatApp
WeChat

Detailed content

  1. Physical & Environmental:
    • Dimensions: 147 mm (L) × 51.8 mm (W) × 116 mm (H) .
    • Weight: 2.0 kg (shipping weight) .
    • Operating Temperature: -20°C to +60°C .
    • Protection Rating: IP54 (dust/moisture-resistant) .
    • Power Supply: 24 V DC ±10% ; Consumption: ≤4.5 W .
  2. Interfaces & Protocols:
    • Primary Network: Fiber-optic multidrop network (high-speed serial link) .
    • Data Synchronization: Hardware-level reflective memory architecture .
    • Interrupt System: Three user-definable interrupt levels for process synchronization .
    • Front-Panel Access: Isolated BNC connector for internal reference voltage calibration .

Functional Features

  1. Real-Time Data Sharing:
    • Reflective Memory Technology: Writes to on-board RAM automatically broadcast to all nodes, enabling microsecond-level data synchronization without CPU overhead .
    • FIFO Buffering: Optimizes CPU/bus performance during peak data rates .
  2. High Reliability & Diagnostics:
    • Hot-Swap Support: Modules replaceable without system shutdown .
    • Self-Diagnostics: Automatic post-reset checks; status LEDs indicate operational health .
    • Calibration: Embedded DSP for automatic offset/gain calibration .
  3. Industrial Robustness:
    • Noise Immunity: Fiber-optic isolation eliminates EMI interference .
    • Conformal Coating: Protects against humidity/chemicals in harsh environments .
  4. Ease of Integration:
    • Node Configuration: Unique ID (0–255) set via hardware jumpers .
    • Software Transparency: No driver initialization required (except for interrupts) .

Application Scenarios

  1. Military & Aerospace:
    • Radar systems, missile guidance, and flight simulators requiring deterministic data exchange .
    • Critical Requirement: Sub-millisecond latency for real-time threat response .
  2. Industrial Automation:
    • Synchronized production lines (e.g., automotive robotics) using shared memory for actuator control .
    • Data Integrity: 16-bit resolution for precision motion control .
  3. Energy Infrastructure:
    • Power grid stabilization: Integrates with turbine control systems (e.g., GE Mark VIe) for load balancing .
    • Safety Compliance: SIL 2-certified for fault-tolerant process control .
  4. Test & Measurement:
    • High-speed data acquisition (200 MS/s) for R&D labs capturing transient signals .

Compatibility & Ecosystem

  1. Hardware Integration:
    • Controllers: ABB AC 800M, GE RX3i .
    • VME Systems: Compatible with 6U 19-inch chassis (up to 9 slots) .
  2. Software Tools:
    • Calibration/Diagnostics: VMIC-specific utilities for gain/offset tuning .
    • Protocol Support: Modbus TCP, EtherNet/IP via gateway modules .

Installation & Maintenance

  1. Deployment Guidelines:
    • ESD Protection: Mandatory anti-static handling during installation .
    • Cabling: Fiber-optic segregation from power lines to prevent EMI .
  2. Preventive Maintenance:
    • Biannual fiber connector cleaning .
    • Annual recalibration of reference voltage .
  3. Troubleshooting:
    • Data Latency: Verify node ID conflicts or fiber attenuation .
    • Boot Failure: Check 24V DC stability and ESD damage .

Certifications & Support

  • Compliance: CE, ATEX (Zone 2), RoHS .
  • Warranty: 12 months (extendable to 36 months) .
  • Global Service: GE-certified engineers; 48-hour critical failure response .

You may also like