Digital guide
You are here:
GE TG3226
Product Name: General Duty Safety Switch (Fusible Disconnect Switch)
Product Introduction: This is a general duty safety switch designed for residential and light commercial applications where duty is not severe. Listed to UL Standard 98 for enclosed and dead-front switches, it is suitable for use as service equipment when installed per the National Electrical Code.
Detailed content
Technical Specifications:
-
Amperage: 600 A
-
Poles: 2
-
Wires: 3
-
Voltage: 240 V AC
-
Fusing: Fusible
-
Enclosure: NEMA 1 (Indoor)
-
Wire Range (Cu/Al): (2) 4–500
-
Dimensions (H×W×D): 49.94 × 22.94 × 9.0 inches (approx. 1268 × 582 × 229 mm)
-
Weight: 107.0 lbs (approx. 48.5 kg)
-
HP Rating: 75 HP @ 240 V AC (NEC Std, 3-ph); 100 HP @ 240 V AC (Time Delay, 3-ph)
-
Mechanism: Quick-make, quick-break (30–200 A models)
-
Conductor Rating: 60/75°C
-
Classifications: UL Listed; CSA Certified (CSA Standard 22.2 No. 4-04); Meets/exceeds NEMA KS1
-
GSA Compliance: No
Key Features: Enclosed dead-front design for safety; fusible configuration for enhanced overcurrent protection; NEMA 1 indoor enclosure; quick-make/quick-break mechanism for reliable operation; suitable for service equipment use.
Application Scenarios: Residential and light commercial main service disconnects; branch circuit isolation; HVAC and motor load disconnection (up to 100 HP @ 240 V); general purpose power isolation in non-severe duty applications.
Installation & Usage Notes: Install per National Electrical Code; suitable as service equipment only when installed in accordance with NEC; ensure proper torque on lug connections for (2) 4–500 wire range; top or bottom feed configurable via factory “B” suffix option.
