Digital guide
You are here:
GE IS420PFFAH1B
Product Name: Mark VIe Foundation Fieldbus I/O Module (FF H1)
Product Introduction: This module is a high-integrity Foundation Fieldbus I/O pack for GE’s Mark VIe distributed control and turbomachinery systems. It enables digital communication between the control system and field devices (sensors, actuators) using the Foundation Fieldbus protocol, replacing traditional analog 4–20 mA signals.
Detailed content
Technical Specifications:
-
Protocol: Foundation Fieldbus (H1, 31.25 kbps, IEC 61158-2)
-
Fieldbus Ports: 2 × isolated FF H1 channels
-
Network Ports: 2 × 100 Mbps full-duplex IONet Ethernet (redundant)
-
Common Mode Voltage Range: +5 V DC
-
Max Lead Resistance: 15 Ω
-
Analog Output Current: 0–20 mA
-
Power Supply: 24 V DC (±10%) or 18–32 V DC redundant
-
Power Consumption: 12 W typical
-
Operating Temperature: -30°C to +55°C (extended versions: -40°C to +70°C)
-
Frequency: 50/60 Hz
-
Dimensions (H×W×D): 82.6 × 41.6 × 120 mm
-
Weight: Approx. 0.9 kg (2 lbs)
-
Isolation Rating: 2500 Vrms field-to-backplane
-
Certifications: CE, UL, ATEX optional; Class I Div 2, Zone 2; G3 conformal coating
-
Firmware: ControlST v07.01 or higher required
-
Associated Manual: GEH-6721
Key Features: Foundation Fieldbus digital communication (reduces wiring, improves accuracy); multidrop topology; power-over-bus (single cable for power + data); comprehensive diagnostics with LED indicators; hot-swap capable; industrial hardened for vibration, dust, moisture.
Application Scenarios: Power generation turbine control, boiler instrumentation, BMS; oil & gas ESD, F&G, process control, offshore platforms; chemical reactor control and safety interlocks; pulp & paper distributed I/O and process monitoring.
