Digital guide
You are here:
GE IS220PDOAH1AB
-
Product Identity: An I/O pack providing robust relay-based discrete output capabilities for the Mark VIe system.
-
Functional Overview: This module translates digital control commands from the controller into physical actions by switching field devices such as solenoid valves, motor contactors, and alarm horns. It features built-in diagnostics to detect contact welding or coil failures.
Detailed content
-
Technical Specifications:
-
Output Configuration: 12 electrically isolated electromechanical relays.
-
Contact Rating: Typically 2A at 30V DC or 0.5A at 125V AC.
-
Response Time: Less than 1 millisecond for state changes.
-
Isolation Voltage: Minimum 1500V DC channel-to-backplane isolation.
-
Redundancy: Dual IONet ports allow seamless switchover in case of network failure.
-
-
Working Principle: Employs solid-state drivers to energize the relay coils, minimizing wear on the processor-side components. Each relay features a snubber circuit to suppress voltage spikes generated by inductive loads.
-
Installation Requirements: Requires adequate spacing for heat dissipation. Field wiring should utilize ferrules and be torqued to specifications. Do not exceed the rated current to prevent contact degradation.
