Digital guide
You are here:
GE IS220PAICH2AA
Product Name: GE Mark VIe Analog Input/Output Module with HART Support
Introduction: The IS220PAICH2A (listed as IS220PAICH2AA) is a high-performance analog I/O module (Analog I/O Pack) widely used in GE Mark VIe gas turbine, steam turbine, and industrial process control applications. It is an intelligent front-end device with active communication capabilities, typically installed in a VME rack and directly plugged into a terminal board via a DC-37-pin connector, serving as the core link between field sensors/actuators and the digital control system.
Detailed content
Technical Specifications & Performance Parameters:
- Analog Input Channels: 10 channels
- Analog Output Channels: 2 current-loop outputs
- ADC: 24-bit Σ-Δ ADC; DAC: 16-bit
- Accuracy: ≤ ±0.05% FS; measurement accuracy better than ±0.1%
- Isolation: 2500 Vrms between channels and between channels and ground
- HART: Each input channel natively supports HART protocol with superimposed signal decoding
- Communication: Dual 100 Mbps TSN Ethernet ports (RJ45), supports IEEE 1588 PTPv2
- Hot-Swap: Supported (allows replacement while system is running)
- Operating Temperature: -40 °C to +85 °C (some configurations -40 °C to +70 °C)
- Weight: 1 kg (2.2 lbs)
- Dimensions: 16 cm × 16 cm × 12 cm packing size
- Origin: USA
Functional Features: High-density multi-channel configuration; industrial-grade electrical isolation blocking ground loop interference and common-mode noise; intelligent diagnostics with HART communication; dual Ethernet with redundant architecture; hot-swappable for minimal downtime.
Application Scenarios: Gas turbine power generation, steam turbine control, combined-cycle plants, industrial co-generation facilities. Processes analog signals from temperature sensors, pressure transducers, flow meters, and vibration probes; delivers control outputs to actuators and valves. Examples include deployment in 9HA.02 gas turbines for digital twin monitoring systems.
Companion Components: Spring terminal block IS200STAIH1A; barrier terminal block IS200STAIH2A; current output I/O pack IS220PAOCH1A; UCSB controller IS420UCSBH1A; power distribution feedback module IS220PPDAH1B; managed switch IS420ESWCH2A.
Installation & Usage Notes: Specifically designed for Mark VIe architecture (not backward compatible with older Mark VI). Follow GE safety procedures during live maintenance when hot-swapping. Pair with appropriate terminal boards (e.g., IS200STAIH1A) for field wiring termination.
