Digital guide

You are here:
  1. Home
  2. GE
  3. GE IS215ACLAH1A

GE IS215ACLAH1A

Product Name:​ GE IS215ACLAH1A – Application Control Layer Module (ACLA) for EX2100 Excitation Control System
Introduction:​ A high-performance Application Control Layer (ACLA) module designed for GE’s EX2100 excitation control system, serving as a master controller for gas/steam turbine excitation, generator control, and industrial drive applications.
WhatApp
WeChat

Detailed content

Technical Specifications:
  • Series:​ GE EX2100 Excitation Control
  • Module Type:​ Application Control Layer (ACLA)
  • Processor:​ 486/100 MHz or Pentium P5/266 MHz
  • Memory:​ 128 MB DRAM (expandable) + CompactFlash (non-volatile firmware storage)
  • Interfaces:​ 2 × 10/100 Mbps Ethernet (RJ45), 2 × RS-232C (COM1/COM2), PCI bus
  • Power Supply:​ 5 V DC via backplane
  • Mounting:​ EX2100 VME rack, 2-slot, 6U height
  • Operating Temperature:​ 0 °C to 45 °C
  • Software:​ QNX real-time OS, GE Toolbox configuration & diagnostics
  • Indicators:​ Active, OK, ENET, Status, Flash LEDs
Key Features:
  • High processing power (optional 266 MHz Pentium) for complex excitation algorithms
  • Redundancy support—compatible with EX2100 redundant control racks (e.g., IS200ERRB backplane)
  • Flexible communication via dual Ethernet and serial interfaces for integration with turbines, HMIs, and third-party systems
  • Non-volatile CompactFlash ensures firmware persistence without battery backup
  • 2-slot 6U form factor optimizes rack space while supporting PCI/ISA bus interfaces
Materials & Construction:​ 6U VME form-factor board; surface-mount components; CompactFlash socket; dual Ethernet magnetics; PCI edge connector.
Working Principle:​ As the application control layer, the module runs the QNX real-time multitasking OS and executes excitation control algorithms, parameter monitoring, and alarm handling. It communicates with I/O packs and other controllers over dual Ethernet and RS-232, and exchanges data with the backplane via the PCI bus. Firmware is stored on CompactFlash for field upgrades.
Application Scenarios:
  • Gas turbine excitation systems
  • Steam turbine excitation systems
  • Hydroelectric turbine control
  • Industrial drive assemblies and energy management systems
Installation & Usage Notes:
  • Install in an EX2100 VME rack occupying two adjacent slots; ensure backplane compatibility (e.g., IS200ESBP, IS200EBKP).
  • Firmware version must be ≥ 2.0 for full feature support.
  • Choose the Pentium 266 MHz variant for complex control algorithms.
  • For redundant operation, deploy in an EX2100 redundant control rack with a compatible backplane.
  • Confirm proper 5 V DC backplane power and adequate cooling within the 0–45 °C operating range.

You may also like