Digital guide

You are here:
  1. Home
  2. GE
  3. GE IS200JPDBG1A

GE IS200JPDBG1A

Product Name:​ Mark VI Power Distribution Board (JPDB)
Product Introduction:​ The IS200JPDBG1A (revision IS200JPDBG1ABB) is a Power Distribution Board (functional acronym JPDB) manufactured by GE for the Speedtronic Mark VI turbine control system. It distributes regulated 24 V DC power from system power supply modules to local terminal boards, I/O packs, and control racks within the Mark VI turbine control cabinet, incorporating circuit protection, status indication, and diagnostic feedback.
WhatApp
WeChat

Detailed content

Technical Specifications:
  • Manufacturer: GE Power / GE Vernova
  • System Compatibility: Speedtronic Mark VI Control System
  • Part Number: IS200JPDBG1A / IS200JPDBG1ABB
  • Board Acronym: JPDB (Power Distribution Board)
  • Input Voltage: Nominal 24 V DC (dual redundant supply bus inputs)
  • Output: Multiple fused 24 V DC distribution outlets
  • Circuit Protection: Onboard status-monitored fuses / solid-state limiters
  • Diagnostics: Onboard LED indicators + diagnostic voltage feedback to main processor
  • Operating Temperature: -30°C to +65°C (-22°F to +149°F)
  • Form Factor: Cabinet-mounted printed circuit board
  • ABB Sub-revision: Conformal coating applied for harsh turbine room environments
Functional Features:
  • Dual 24 V DC power input redundancy for seamless failover
  • Individual circuit protection per output branch prevents a single field short from bringing down the entire rack
  • Real-time diagnostics monitor output voltage and fuse integrity, reporting to Mark VI processor for alarm logging in CIMPLICITY/HMI
  • Green power-present LEDs and red blown-fuse indicator LEDs for fast visual inspection
  • Conformal coating on ABB revision protects against moisture, chemical vapors, and particulates
Material Composition & Structure:
  • Cabinet-mounted PCB
  • Onboard fuses and current limiters for each distribution branch
  • LED indicators (green/red)
  • Dual redundant 24 V DC input bus terminals
  • Multiple fused 24 V DC output terminals
Working Principle:​ The JPDB board receives dual 24 V DC feeds from the system power supply modules. Each feed is routed through individual current limiters and fuses to the output distribution terminals. The board continuously monitors the voltage level of each output branch and the integrity of each fuse. If a fuse blows or a voltage anomaly is detected, the board immediately signals the Mark VI main processor via the backplane, which logs an alarm in the CIMPLICITY/HMI workspace. In the event of a primary supply failure, the redundant 24 V DC bus seamlessly takes over, preventing interruption to connected I/O cards and sensor loops.
Installation Requirements:
  • Mount in the Mark VI control cabinet per GE layout drawings
  • Connect both 24 V DC redundant supply bus inputs to the respective system power supply modules
  • Route the fused 24 V DC output branches to the target terminal boards, I/O packs, and control racks
  • Verify conformal coating presence (ABB revision) matches the turbine hall environmental requirement
Usage Precautions:
  • Do not exceed the rated current of individual fused outputs
  • When replacing a blown fuse, identify and clear the field wiring short first
  • The ABB conformal-coated variant is not field-repairable — replace as a unit
  • Maintain the cabinet environment within -30°C to +65°C

You may also like