• Input Filter: Adjustable from 10 ms to 100 ms in 10 ms increments
• Power Consumption:
  • 8 inputs active: 16 W max
  • 8 outputs active: 43.5 W max (2 A current)
• Isolation: 1500 VAC channel-to-channel isolation
• Response Time:
  • AC: 0.5 Hz + 1 ms
  • DC: 1 ms
• Diagnostic Features:
  • Input diagnostics: Open circuit, overtemperature, I/O power loss
  • Output diagnostics: Short circuit, overload, no-load, overtemperature, I/O power loss
• Environmental Conditions:
  • Operating temperature: -20°C to 60°C
  • Storage temperature: -40°C to 85°C
  • Humidity: 5%–95% (non-condensing)
• Dimensions (H × W × D): 22.44 cm × 8.48 cm × 9.93 cm
• Weight: 1.8 kg

Functional Features

• Flexible Configuration: Each of the 8 channels can be independently configured as an input or output, adapting to diverse control requirements.
• Electronic Fusing: Each channel includes an electronic fuse that trips within 5 ms if output current exceeds 30 A (or 20 A for two cycles), with easy recovery via handheld monitor or central processor commands.
• Fault Reporting: Enables or disables fault detection (e.g., open circuits, overloads) on a per-channel basis for precise troubleshooting.
• Backward Compatibility: Replaces legacy modules (e.g., IC660CBD100, BBD100) without requiring system reconfiguration.
• LED Indicators: Provides visual status for module health, I/O enable, and channel activity.

Application Scenarios

• Manufacturing: Controls small-scale actuators (e.g., solenoid valves, motor contactors) in automotive or electronics assembly lines.
• Energy Sector: Monitors and switches discrete loads in power generation and distribution systems (e.g., circuit breaker status, alarm triggers).
• Water Treatment: Manages pump control and valve actuation in wastewater treatment plants.
• Transportation: Supports signaling and safety systems in railways and intelligent traffic management.
• Oil & Gas: Safeguards critical equipment in extraction and refining operations by monitoring emergency shutdown (ESD) signals.

Key Advantages

• High Reliability: Designed for harsh environments with wide temperature tolerance and robust isolation.
• Reduced Downtime: Electronic fusing and diagnostic features minimize maintenance efforts.
• Seamless Integration: Compatible with GE’s Genius Bus and third-party controllers via standard protocols.