Digital guide
You are here:
GE IC660BBA105N1
Product Name: GE Fanuc IC660BBA105N1 – Genius I/O Current-Source Analog 6-Output Block
Product Introduction: The IC660BBA105 is a current-source analog output block in the GE Fanuc Series 90-30 PLC family and the Genius I/O product line. It provides six electrically identical, isolated 4–20 mA current sourcing outputs for driving field devices. It can be powered by either 115 VAC or 125 VDC, and supplies isolated power to the current loops directly — no external loop power supply is required. A variant (IC660BBA025) supports 24/248 VDC power.
Detailed content
Technical Specifications:
- Number of Outputs: 6 analog outputs (current-sourcing)
- Output Range: 4–20 mA (full-scale 0–24 mA)
- Resolution: 12-bit D/A conversion; 6 µA per count
- Accuracy: 0.15% of full scale at 25 °C
- Update Rate: 25 ms
- Power Supply: 115 VAC (93–132 VAC) or 125 VDC (105–145 VDC); 50/60 Hz
- Heat Dissipation: 12 W
- Block-to-Block Isolation: 1500 V for 1 minute
- Terminals: 32 terminals (power at 6 & 7; outputs at 11–22; BSM at 9–10)
- Communication: Genius Bus protocol; baud rate 38.4 kbaud or 76.8 kbaud
- Dimensions: 8.83″ H × 3.50″ W × 3.94″ D
- Weight: Approximately 0.85 kg
Key Features:
- Six isolated 4–20 mA current-sourcing outputs
- Onboard isolated power for current loops (no external supply needed)
- Comprehensive diagnostics: over-range, under-range, feedback < 1.5 mA detection
- Configurable output hold or default state on CPU fault
- Compatible with all Genius bus controllers
Functional Characteristics: Converts 12-bit digital signals to analog 0–24 mA. Values display on handheld monitor as individual integers per output.
Compatibility:
- Compatible CPUs: Series 90-30 (rev. 105+ for Series Six, rev. 110+ for Series Six Plus, rev. 3.0+ for Series Five)
- Programming Software: Logicmaster 6 version 4.02 or later
- Handheld Monitor: Version 3.7 or above
- Bus Switching Module: IC660BSM021 (only compatible BSM)
- Compatible Controllers: Series 90-30, Series Five, Series Six, Series Six Plus PLCs
Application Scenarios: Distributed analog output control in GE Fanuc Genius-based automation systems, connecting to valves, positioners, and other 4–20 mA field instruments.
Configuration & Diagnostics: Fault reporting can be disabled if needed. Supports CPU redundancy.
