Digital guide

You are here:
  1. Home
  2. GE
  3. GE DS3800HMHA

GE DS3800HMHA

Product Name:​ GE Turbine Speed Feedback & Monitoring Module
Product Overview:​ The GE DS3800HMHA is a high-precision turbine speed feedback module engineered for GE’s Mark VIe DCS and Turbine Control Systems (TCS). As a core speed monitoring device, it receives and processes signals from speed sensors (e.g., GE magnetic pickups, optical encoders) to deliver real-time, accurate rotational speed data to control systems. This data is essential for maintaining optimal turbine performance, preventing overspeed conditions, and enabling predictive maintenance of rotating components.
WhatApp
WeChat

Detailed content

Technical Specifications:
  • Manufacturer: GE (Power & Water, Mark Series)
  • Product Type: Turbine Speed Feedback & Monitoring Module
  • Speed Measurement Range: 0–10,000 RPM (configurable up to 30,000 RPM)
  • Input Signal Type: AC Voltage (from magnetic pickups); TTL/RS485 (from optical encoders)
  • Input Channels: 4 Independent Input Channels (for redundant sensor setup)
  • Measurement Accuracy: ±0.01% of Reading (at 1,000–10,000 RPM)
  • Output Signals: 4–20 mA DC (speed proportional); Digital Status (over/underspeed); Relay Contacts (alarm/trip)
  • Communication Protocol: Modbus RTU; GE Mark VIe Native Protocol
  • Operating Voltage: 24 V DC (±10%); 125 V DC (optional)
  • Power Consumption: ≤5 W (standby); ≤8 W (full load)
  • Operating Temperature: -20°C to +60°C (-4°F to +140°F)
  • Storage Temperature: -40°C to +85°C (-40°F to +185°F)
  • Enclosure Rating: IP20 (Chassis Mount); IP40 (with optional protective cover)
  • Mounting Type: DIN Rail (35 mm) or Panel Mount
  • Compliance Standards: IEC 61508 (SIL 2), IEEE 421.5, CE, UL 508
  • Weight: 0.65 kg
  • Fault Detection: Sensor Open/Short Circuit; Signal Loss; Overvoltage Protection
  • Redundancy Support: 2-out-of-3 (2oo3) Voting Logic
Functional Features:
  • Calibrated for GE turbine dynamics with built-in fault detection and redundancy support
  • Seamless integration with GE’s safety interlock systems (e.g., GE Fanuc Safety PLCs) for rapid activation of emergency shutdown (ESD) protocols if speed thresholds are breached
  • Pre-sales signal validation testing confirms compatibility with turbine sensors and GE control systems
Application Scenarios:​ Power plants, petrochemical refineries, industrial facilities relying on rotating equipment (e.g., steam turbines, gas turbines, large centrifugal compressors).
Installation Requirements:
  • DIN Rail (35 mm) or Panel Mount
  • Chassis Mount with IP20 enclosure rating
Usage Notes:
  • Supports 2-out-of-3 (2oo3) voting logic for redundancy
  • Complies with IEC 61508 SIL 2 standards for safety integrity

You may also like