Digital guide
You are here:
GE 0621L0436-G001
Product Name: GE Mark V DCS +5 VDC Power Supply Module
Product Overview: The 0621L0436-G001 is a dedicated +5 VDC stabilized power supply module for the GE Mark V Distributed Control System. The “G001” suffix denotes the first revision. It provides stable +5 VDC working power to the Mark V system’s logic circuits, communication interfaces, and certain I/O modules.
Detailed content
Technical Specifications:
- Series: GE Mark V DCS
- Output Voltage: +5 VDC (nominal)
- Output Voltage Precision: ±2%
- Rated Output Current: 10 A (continuous)
- Peak Output Current: 15 A (short-term ≤ 5 s)
- Input Voltage: 120 VAC / 240 VAC (selectable via jumper)
- Input Frequency: 47–63 Hz
- Efficiency: ≥ 82% (typical, full load)
- Ripple & Noise: Within standard Mark V specification
- Insulation Withstand Voltage: 1500 VAC / 1 minute (input-to-output)
- MTBF: 100,000 hours
- Module Weight: Approx. 2.8 kg
Material Composition: Cold-rolled steel housing with powder-coat paint (RAL 7035 light gray); silicon-steel core transformer with copper windings; fast-recovery diodes and MOSFET switching devices; combined electrolytic and ceramic filter capacitors.
Structural Features: Standard Mark V power module form factor; front panel includes analog meter (voltage/current), LED indicators, and output terminals; rear panel carries system bus connector and AC input terminals.
Working Principle: AC input passes through an EMI filter, then a full-bridge rectifier converts it to DC. A high-frequency PWM switching topology performs DC-DC conversion to deliver a stabilized +5 VDC output.
Application Scenarios: Power source for logic circuits, communication interfaces, and selected I/O modules within GE Mark V DCS cabinets in power generation and heavy industrial control.
Installation Requirements: Mount in the designated Mark V power bay. Set the 120/240 VAC input jumper correctly for the site supply. Connect AC input to the rear terminals. Engage the system bus connector on the rear. Ensure adequate clearance for ventilation.
Usage Notes: Verify input voltage selection before energizing. Do not exceed 15 A peak draw beyond 5 s. Maintain ventilation around the module. The module is heavy (2.8 kg) — secure properly during installation.
