Technical Specifications:

• Number of Channels: 16 digital inputs (2 groups of 8 channels)
• Input Type: 24V DC, PNP (sourcing / positive logic)
• Input Voltage Range (High Level / ON): 15V to 30V DC
• Input Voltage Range (Low Level / OFF): 0V to 10V DC
• Input Current (Typical): 3 mA per channel (sourced from sensor)
• Response Time (ON→OFF / OFF→ON): < 1 ms (typical), filter adjustable (0.1 ms to 25.6 ms)
• Isolation: Channel-to-channel isolation, group-to-group isolation
• Rated Insulation Voltage: 500 V AC (IEC 61131-2)
• Supply Voltage: 24V DC via X20 bus connector
• Power Consumption: Approx. 2.0 W

Functional Features:

• Per-channel LED status indicator (green = ON, off = OFF)
• Wire-break detection per channel (diagnostic bit)
• Short-circuit detection per channel (diagnostic bit)
• Configurable input filter per channel (0.1 ms to 25.6 ms)
• Hot-swap capable
• Overvoltage protection: 36V DC clamp (integrated)
• PNP-optimized — no external pull-down resistors required for 2-wire PNP sensors

Structural Features:

• Form Factor: 45 mm width, X20 standard
• Mounting: DIN rail 35 mm / direct screw
• Connector: X20 system bus (top)
• Terminal Type: Push-in spring clamp, 0.14 mm² to 2.5 mm²
• Housing Material: Polycarbonate (PC), UL94 V-0
• Protection Rating: IP20
• Dimensions (W × H × D): 45 mm × 90 mm × 75 mm (approx.)
• Weight: Approx. 120 g

Operating Conditions:

• Operating Temperature: -25°C to +70°C
• Storage Temperature: -40°C to +85°C
• Relative Humidity: 5% to 95% (non-condensing)
• Vibration: 5 m/s² (IEC 60068-2-6)
• Shock: 30 g (IEC 60068-2-27)

Applicable Industries:

• 2-wire PNP proximity sensor interface (inductive, capacitive, photoelectric)
• Safety light curtain input (PNP type)
• Pushbutton and selector switch monitoring
• Encoder input (A/B/Z channels, PNP output encoders)
• Valve position feedback (PNP solenoid valves)
• Presence detection on conveyor systems

Installation Requirements:

• DIN rail 35 mm (EN 60715)
• Wire size: 0.14–2.5 mm² copper conductors
• Wiring for 2-wire PNP sensor: Brown (24V) → sensor V+, Blue (0V) → sensor V-, Black (output) → X20 input terminal
• Minimum 10 mm spacing between modules
• For long cable runs (> 10 m), enable input filter

Usage Precautions:

• This module is PNP (sourcing) only — do not connect NPN sensors directly
• Do not exceed 30V DC on any input terminal
• Do not apply AC voltage
• For NPN sensors, use X20DN series module instead
• Enable input filter for noisy environments or long cable runs

Advantages & Highlights:

• 16 PNP channels in 45 mm width — highest density for sourcing inputs
• Native PNP support eliminates external pull-down resistors — reduces wiring cost
• Adjustable input filter prevents false triggers from EMI
• Full per-channel diagnostics enable condition-based maintenance