Technical Specifications:

• Output Voltage: 24 V DC (adjustable ±5%)
• Output Current: 5.0 A (continuous)
• Output Power: 120 W (maximum)
• Input Voltage Range: 100 V AC to 240 V AC (single-phase, 50/60 Hz)
• Input Frequency: 50 Hz / 60 Hz (auto-sensing)
• Efficiency: Greater than 88% (at full load)
• Output Ripple: Less than 100 mV peak-to-peak
• Output Noise: Less than 50 mV RMS
• Protection Features: Short-circuit protection, overcurrent protection, overvoltage protection, overtemperature protection
• DC OK Relay: 1 × changeover contact, 250 V AC / 3 A
• Protection Rating: IP20
• Operating Temperature: 0 °C to +50 °C (derating above +40 °C)
• Storage Temperature: -25 °C to +70 °C
• MTBF: Greater than 100,000 hours (at 25 °C)
• Dimensions (W × H × D): Approximately 50 mm × 120 mm × 80 mm
• Weight: Approximately 0.45 kg
• Mounting: DIN rail TS 35
• Safety Certifications: CE, UL, cUL, CCC

Functional Features:

• Universal AC input (100–240 V AC) for global deployment
• DC OK relay for system-level fault monitoring
• LED power status indicator
• High efficiency reduces thermal load in control cabinet
• Conformal coated PCB for enhanced reliability in harsh environments

Applicable Industries:
Industrial automation, machine building, process control, packaging, material handling, OEM equipment.

Installation Requirements:

• Mount on DIN rail TS 35
• AC input: L, N, PE terminals (wire size: 1.5 mm² minimum)
• DC output: +V, -V terminals (wire size: 2.5 mm² minimum for 5 A)
• DC OK relay: wire to PLC input for fault detection
• Maintain 10 mm minimum clearance on all sides for ventilation

Usage Notes:

• Derate output current by 2% per °C above +40 °C ambient
• Always connect protective earth (PE)
• DC OK relay must be monitored by controller for fault response
• Do not block ventilation openings