Technical Specifications:

• Output Voltage: 24 V DC (adjustable ±5%)
• Output Current: 2.1 A (continuous)
• Output Power: 50 W (maximum)
• Input Voltage Range: 100 V AC to 240 V AC (single-phase, 50/60 Hz)
• Input Frequency: 50 Hz / 60 Hz (auto-sensing)
• Efficiency: Greater than 85% (at full load)
• Output Ripple: Less than 100 mV peak-to-peak
• Output Noise: Less than 50 mV RMS
• Protection Features: Short-circuit protection, overcurrent protection, overvoltage protection, overtemperature protection
• Protection Rating: IP20
• Operating Temperature: 0 °C to +50 °C (derating above +40 °C)
• Storage Temperature: -25 °C to +70 °C
• MTBF: Greater than 100,000 hours (at 25 °C)
• Dimensions (W × H × D): Approximately 50 mm × 90 mm × 60 mm
• Weight: Approximately 0.25 kg
• Mounting: DIN rail TS 35
• Safety Certifications: CE, UL, cUL, CCC

Functional Features:

• Universal AC input (100–240 V AC) for worldwide deployment
• High efficiency reduces heat generation
• Comprehensive protection circuitry for system safety
• DIN rail mounting for cabinet installation
• Low EMC emissions per EN 61000-6-4

Applicable Industries:
Machine building, panel building, OEM equipment, food and beverage, pharmaceutical, general industrial automation.

Installation Requirements:

• Mount on DIN rail TS 35
• Connect AC mains via terminal block (L, N, PE)
• Connect DC output via terminal block (+V, -V)
• Ensure adequate ventilation (minimum 10 mm clearance on all sides)
• Use wire cross-section per current rating: minimum 1.5 mm² for output

Usage Notes:

• Do not block ventilation openings
• Output voltage adjustment via internal potentiometer (±5% range)
• Derate output current by 1% per °C above +40 °C ambient
• Ensure proper PE (protective earth) connection