Digital guide
You are here:
Bently Nevada 330500-00-02 Velomitor Piezo-velocity Sensor
Product Introduction:
A solid-state piezoelectric velocity sensor that measures absolute (relative to free space) bearing housing, casing or structural vibration. Integral electronics convert acceleration to velocity, eliminating the need for external signal conditioning while offering wide frequency response and high reliability with no moving parts.
A solid-state piezoelectric velocity sensor that measures absolute (relative to free space) bearing housing, casing or structural vibration. Integral electronics convert acceleration to velocity, eliminating the need for external signal conditioning while offering wide frequency response and high reliability with no moving parts.
Technical Specifications:
-
Sensor Type: Piezo-velocity (integrated accelerometer)
-
Sensitivity: 3.94 mV/mm/s (100 mV/in/s) ±5 %
-
Frequency Response: 4.5 Hz – 5 kHz (±3 dB); 6 Hz – 2.5 kHz (±0.9 dB)
-
Velocity Range: 0 – 1,270 mm/s (0 – 50 in/s) peak
-
Transverse Sensitivity: <5 %
Detailed content
-
Output Impedance: 100 Ω
-
Power Requirement: 2 – 10 mA constant-current, 18 – 30 VDC supply
-
Connector: 2-pin Mil-C-5015 hermetically sealed, 316L stainless shell
-
Cable Length: Up to 305 m (1,000 ft) without signal degradation
-
Operating Temperature: –55 °C to +125 °C
-
Protection: IP67, 316L stainless steel case
-
Dimensions: Ø25.3 × 63.2 mm
-
Weight: 142 g
Functional Features:
-
Solid-state design eliminates mechanical wear
-
Can be mounted vertically, horizontally or at any angle
-
Integral electronics remove need for separate accelerometer and integrator
-
CE mark without external shielding conduit
-
Compatible with 3500/42M, 1900/65A, 2300/20 monitors
Application Scenarios:
-
Motor and pump bearing-housing vibration
-
Fan and blower structural monitoring
-
Gearbox casing velocity trending
-
Paper-machine roll vibration
-
Cooling-tower fan health assessment
