Digital guide
You are here:
Bently 330103-00-06-10-02-00
Product Introduction:
A tip-sensitive eddy-current probe installed from inside a hollow shaft to measure thrust-collar position or speed. Keeps cabling away from rotating parts while delivering the same 2 mm linear range and 7.87 V/mm sensitivity as standard 3300 XL probes.
Technical Specifications:
-
Mounting Style: Reverse-mount, 3/8-24 UNF-2A thread
-
Unthreaded Length: 0 mm
-
Case Length: 60 mm
-
Total Length: 1.0 m (probe + integral cable)
-
Connector: Miniature coax ClickLoc, standard cable
-
Linear Range: 0.25 – 2.3 mm (10 – 90 mils)
-
Sensitivity: 7.87 V/mm (200 mV/mil)
Detailed content
Frequency Response: 0 – 10 kHz
-
Temperature: –52 °C to +177 °C tip, –51 °C to +260 °C cable
-
Protection: IP67, Viton O-ring, 350 bar static seal
-
Approvals: None (general-purpose)
Functional Features:
-
Patented TipLoc™ molding locks probe tip to case
-
CableLoc™ provides 330 N pull strength
-
Laser-welded tip eliminates leakage paths
-
Fully interchangeable within 3300 XL family – no field calibration
Application Scenarios:
-
High-speed integrally-geared compressor thrust collars
-
Turbocharger shaft speed inside turbine housing
-
Down-hole drilling motor RPM sensing
-
Test-cell hollow-shaft torque meters
